Highlights:

• IMPORTANT: This is a generic picture of a similar (smaller) model. Please check the specs for item details. Also, the spindle will be different. See the correct spindle in the 2nd and 3rd pic.
  
• Made In Germany.
• ARMLOCK: The cross-legged jaws guarantee maximum stability for suspending the jaws in the slider.
• GLIDE & FIX: The improved geometry guarantees quick and easy movement of the jaws on the cross-beam.
• HYDRAULIC: Pullers with hydraulic function.
• SWITCH: A two-sided spindle tip provides optimal adjustment of the spindle to the shaft.
  

Removing larger, extremely tight bearings, gears, and discs is easy with the Kukko 80 - 520mm 2 arm Hydraulic Bearing Puller. Because of the grease hydraulic spindle and a mechanical pressure screw, the user can operate the puller with non-powered hand tools.

Features:

• Grease hydraulics.
• Standard pulling hook.
• Parallel pulling hooks in every position, even with full load.
• Pulling hooks with infinitely variable adjustment on the cross-beam.
• Hydraulic and mechanical pressure screw.
• Milled thread treated with special coating.
• Two-arm design for space-saving operation.

Kukko Advantage:

• Easy and even pulling for particularly tight parts.
• Variable reach thanks to jaw extensions, available up to a puller size of -30.
• Optional conversion to various jaw types for mechanical use.
• Turning the pulling hooks enables them to be used both internally and externally.
• Suitable for pulling asymmetric workpieces.
• Spindle head band prevents the wrench from slipping off.
• Cross-beam, up to size -30, includes hexagonal profile for holding.
• Almost all components available as replacement parts, time-saving order process thanks to numbering system.
• Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
• Quality made in Germany.
• Strong design, high performance and long service life.
• Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
• Safety label to ensure protection of intellectual property.
• A tube of KUKKO special grease included for pressure spindle.
• Product video on the product can be opened.

Specs:

• Spread: 80 - 520 mm (3 3/16 - 20 1/2 inch)
• Depth: 200 mm (7 7/8 inch)
• Spread used internal: 200 - 590 mm (7 7/8 - 23 7/8 inch)
• Hexagon drive (male): 36 mm
• Maximum load: 15 t (16.5 US t)
• Weight: 20 kg
• Space below: 20 mm (3/4 inch)
• Space next to it: 67 mm (2 5/8 inch)
• Number of jaws: 2
  

Safety & Operating Info:

• The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
• If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
• The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
• Observe max. torque.
• Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
• Protective blanket required.
• Protective goggles required.

What's included: (SKU and Item Name)

• 8-1-B Long hydraulic spindle
• 3-200-P 2 pulling jaws (pair)
• 20-4-T 2-jaw cross bar