ENGINEER PA-14 Professional Precision Wire Strippers for thin wire (AWG34 - AWG22), sharp and perfectly round finishing edge, Spring loaded Comfortable Handles, Made in Japan

• High performance wire stripper for cutting edge and durability
• With crimping function, you can crimp bare terminals and crimp terminals
• Unique set pins allow you to easily adjust the loosening of long-term use
• For strip of insulated wire
• Each hole diameter: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 0.65mm, 0.8mm, 0.95mm
• High performance stripper for outstanding sharpness.
• Strip holes are designed to fit both single and stranded lines.
• The precision polished finish creates a very round shape with a sharp edge without damaging the core line.
• The main body is made of high carbon steel, so it has excellent abrasion resistance.
• Environmentally friendly elastomer grip Excellent oil resistance.
• For fine lines
• The pin part uses a unique set pin, so it can be easily adjusted to loosen even after long periods of use.
• If you use the tool for a long time, the set pins that have been attached to the shaft may loosen or become uncomfortable.
• This may cause damage to the tools as well as the original performance.
• If the set pin is loose and rattle, please adjust the set pins.
• Wear protective glasses for safety. As the cut will scatter, please make sure there are no people or fragile items around the area before working.
• Do not use for cutting hard materials, piano wires, etc.
• Do not tighten the bolts and nuts on both ends to adjust the gap.
• This may cause the set pin to be damaged.
• Do not apply excessive torque when tightening.
• This may cause damage. (Tightening torque = less than 2N/m)
• Product Size: 2.0 x 6.9 inches (50 x 175)
• Weight: 4.6 oz (134 g).

FREE SHIPPING

OFFICIAL USA SELLER

Buy with confidence – Bridge Precision Tools is the official United States distributor for the legendary Japanese tool manufacturer Engineer