These 16g threaded Co2 Cartridges are filled with 100% pure CO2. Each 16 gram Co2 cartridge is made of 100% recyclable steel and can be easily recycled once empty. The 16G threaded C02 Cartridge perfect for any bicycle tyre pumping requirements. Compatible with a wide variety of bicycle inflation kits, the 16g C02 cartridge is very handy. The 16 gram threaded cartridge is filled with 100% pure C02 for effective and rapid re-inflation.

Whether you are out on a tough ride or racing to beat your best times, this cartridge will fill your bike’s tyre speedily. It will pump your tyre in a single shot.  The 16 gram c02 cartridge is easy to attach and detach from your tyre inflation device. Avoid freezing your hand while using the cartridge, with our foam cover, for safe and easy use of your Co2 pump.

The 16g c02 cartridges can also be used with tyre inflation pumps and kits. The 16 gram threaded Co2 cartridges are compatible with many tyre inflator’s, but ensure that yours is compatible before use. The 16 gram C02 capsule is suitable for use with Road Bikes, BMX, Mountain Bikes and can fill a motorcycle tire.

Here is our quick tyre inflation ‘fill’ guide, per 16g cartridge

  • 1 x 16g to inflate 1 x Road Bike 27-inch/68.5cm tyre to 125/135psi, 8.5-9.2bar
  • 1 x 16g to inflate 1 x MTB Mountain Bike 26 inch/66 cm tyre to 40psi/7.2 bar
  • 1 x 16g to inflate 2 x BMX 20-inch/50cm tyres to 45PSi/3.06 bar
  • 1 x 16g to inflate 1 x Off Road Motocross 80×100-21 tyre to 16psi/1.9bar
  • 2 x 16g to inflate 1 x Off Road Motocross 100×100-18 tyre to 17psi/2.1bar
  • 3 x 16g to inflate 1 x Motorcycle 120-60-17 tyre to 36psi/2.5 bar.
  • 4 x 16g to inflate 1 x Motorcycle 180-55-17 tyre to 32psi/2.2 bar.

16g Threaded Cartridges Specifications

Item Code: 58810-5E28-CO16T

CO2 Cartridge contains 16g (20 Cubic cms) of pure CO2 Carbon Dioxide (E290) at approx 60bar/900psi

Water Capacity: 21 ml

Nominal gas weight content: 16g

Overall diameter (mm): 22mm

Overall length (mm): 88.4mm

Neck/Thread diameter (mm): 3/8″-24 UNF-2A

Filling pressure: 8MPa

Force required to pierce: 400N max

Total cartridge weight: 56gm.

Coating: Fe/Zn8 Zinc plating finish

Main uses: Sports shooting, air gun, air soft, Tyre Inflators, Life Vests, Fire and Life Safety applications

Thread:  Threaded

Disposable: They are non-refillable CO2 Gas Cartridges made with 100% recyclable steel. Do not dispose of unused cartridges!

Certificates: ISO 9001, ISO 14001, HCCP, NSF, TüV, ISO 9002 

This product is not for sale to under 18's.