Brass Stock Metal Round, Square, Flat Bar, Rod, Hex & Angle 50mm to 600mm long

This material is brilliant for milling, turning and drilling purposes. Perfect for the model engineer and machinist.

This material is the most widely used of all the brasses due to its suitability for high-speed machining operations and the manufacture of intricate parts. Its combination of machinability, thread rolling and knurling characteristics, combined with its good strength, an ease of soldering / brazing and a high resistance to corrosion makes it the ideal choice for many brass components throughout industry.

Available in lengths of 50mm, 100mm, 150mm, 305mm, 400mm, 500mm, 600mm

Lengths cut to a tolerance of +/- 2mm.

Stock Metal Tolerances Apply - +/-0.2mm on other dimensions Please note that this is a "rule of thumb" and often dimensions are well within this tolerance.

Any Questions or to discuss bespoke requirements, please ask.

Brass CZ121 Rod Round Bar

Available Diameters

3.18 mm (1/8th inch),

4 mm

5 mm

6 mm

8 mm

10 mm

Other diameters and bars lengths are available - Please ask

 Brass Square Bar (A x A)

Available Square Dimensions

3/16" approximately 4.76 mm

1/4"   approximately 6.35 mm

3/8"   approximately 9.53 mm

1/2"   approximately 12.7 mm

 CZ121 Brass Flat Bar

Available rectangular section dimensions

Metric Size [A x B] Note that the dimensions given in mm are the nearest metric equivalents)

3/8" x 1/8"       approx.   (9.5mm x 3.2 mm)         

1/2" x 1/8"       approx.   (12.7 mm x 3.2 mm)

5/8" x 1/8"       approx.   (15.8 mm x 3.2 mm)

1" x 1/8"          approx.   (25.4 mm x 3.2 mm)

1 1/4" x 1/8"    approx.   (31.75 mm x 3.2mm)                        

3/8" x 1/4"       approx.   (9.5mm x 6.4 mm)         

1/2" x 1/4"       approx.   (12.7 mm x 6.4 mm)

5/8" x 1/4"       approx.   (15.8 mm x 6.4 mm)

1" x 1/4"          approx.   (25.4 mm x 6.4 mm)

1 1/4" x 1/4"    approx.   (31.75 mm x 6.4 mm)            

1/8th Brass Extruded Equal Right Angle 90 Degree "L" Shape

 Leg thickness is 1/8th Inches, approximately 3.18mm

Available in the following dimensions

1/2" x 1/2"   approx.  (12.7mm x 12.7mm)

5/8" x 5/8"   approx.  (15.88mm x 15.88mm)

3/4" x 3/4"   approx.  (19.05mm x 19.05mm)

1" x 1"         approx.  (25.4mm x 25.4mm)

Brass Hexagonal Rod/Bar 5mm, 6mm, 8mm & 10mm Across Flats

Across Flats Measurement: 5mm, 6mm, 8mm & 10mm 

Please see photos for guidance regarding across flat measurements

 Material Information

Brass is an alloy that is comprised of copper and zinc. Different grades of brass will also contain elements of other alloys that will provide different properties. Brass has a high tensile strength, high corrosion resistance and is suitable to be hot forged.

 CZ121

CZ121 is the standard European grade of free-machining brass consisting of a duplex structure and a 3% lead addition. The particles of lead are finely dispersed throughout the microstructure and acts as both a lubricant and a chip breaker to give the alloy its free machining characteristics.

The machinability rating of 100% for CZ121 is the standard against which all other copper alloys are rated. It is the most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. Its combination of machinability, thread rolling and knurling characteristics, combined with its good strength, an ease of soldering / brazing and a high resistance to corrosion makes it the ideal choice for many brass components throughout industry.

01/24