Steering angle limiter / turning angle reducer / made of stainless steel for all vehicle with 24 mm diameter steering linkage, e.g:
VW, Audi, BMW, Seat, Opel, Ford, usw.
The steering angle limiter can be mounted on any vehicle with a 24 mm diameter steering linkage (on request, possible for other diameters).
Thanks to our turning limiters, there is no need to completely take the steering apart: saving time and money!
We have integrated 2 set screws on our steering limiters so that the 2 halves of the limiter are perfectly sysmetric. This ensures a perfect stability.
The set screws must be stabilized with lock nuts.
Delivery:
- 2x steering angle limiters / turning angle reducers / made of stainless steel Ø=24mm / thickness 15mm for VW, Audi, BMW, Seat, Opel, Ford, etc,.
- 2x set screws
Your advantages
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Reviews
- von David am 27.07.2024Alles Super! Ware top, Versand sehr schnell!
- von Falk am 21.06.2024absolute geniale Lösung hat mir richtig Ärger erspart VG Falk
- von Tom am 10.03.2024Verarbeitungsqualität ist nicht die beste aber sie passen und erledigen ihren Job
- von Berndt am 09.10.2023Alles bestens passt super Lieferzeit war etwas lang
- von Christian am 29.05.2022Schnelle unkomplizierte Abwicklung des kaufes.Am Produkt hat mir die passgenauigkeit gefallen sowie der einfachere Einbau der durch die passgenauigkeit und sehr schmale Hände einfacher gehen würde🤣😎. Super Produkt empfehle ich gerne weiter. MfG Benno
- von Felix am 20.04.2022Hat alles super funktioniert und kein Problem wurde behoben . :)
- von Reinhard am 27.03.2021Top Produkt, super verarbeitet und top Qualität Kann es jedem empfehlen der danach sucht
- von stefanie am 28.02.2019Vielen Dank hat alles sehr gut geklappt.
- von mm868 am 29.05.2017Bestens danke !!!!!!
- von reifenservicesommers am 10.04.2017Top
- von powertomster am 02.04.2017Top Artikel, schnelle Lieferung gerne wieder
- von cl-ft am 31.03.2017jeder zeit gerne wieder!!!!!!!!!!!
- von by_dom am 30.01.2017alles besstens
- von pmosi_ch am 07.12.2016Super service! Alles bestens. Gern wieder
FAQ
- What is the outside diameter of the two steering limiters?
The steering limiters for 28mm shafts have an outside diameter of 40mm
- Is there a rough overview of how much the respective widths make up for the steering angle?
Unfortunately, there is no rough overview as it is different depending on the steering angle and the vehicle. But you can move the limiter on the steering rod and use washers or bushings if necessary. Thus the steering angle can be perfectly adapted to your needs.
- What diameter do I need for my vehicle?
Since vehicles have different tolerances depending on the type of steering rod, we cannot confirm an exact diameter required. Therefore, you have to measure the diameter of the steering rod of your vehicle.
- Do I have to demount the steering rod for this?
No it's not necessary. Our steering angle limiters are designed so that all you have to do is loosen the gaiter/collar, then put it on and off.
Why should you buy from us?
Adapter Made in Germany Beware of inferior quality copies. Unlike other manufacturers, we produce not in low-wage countries. Our products stand for high-quality materials and more precise processing through the latest machine technologies.
Easy TÜV registration We have been officially certified as a manufacturer by TÜV SÜD. This enables the expert to make an easy entry. In addition, we supply a certificate for many products.
Technical Support - Our professionals will continue to support you after your purchase We develop our products ourselves. This means we know the intended use and can respond perfectly to our customers' questions.
100% satisfaction guarantee We want to convince you of our quality and our service. That's why we've extended the return policy from 14 to 100 days