Orange Controller

12/24V 30/50/70A Solar Charge Controller Panel Battery Regulator Dual USB

Specification:
Material: Plastic
Model: PVSC30A/PVSC50A/PVSC70A
Voltage: 12/24V
Current: 30A/50A/70A
Max.pv voltage: 50V
USB Output: 2.4A *2
Over Charge Current(V): 13.7V/*2 24V
Over Discharge Current(V): 10.5-11V/*2 24V
Temperature Compensation: -3mv/℃/cell
Empty Load Wastage: <45mA
Loop Voltage Drop: <200mv
Display: LCD Display
Size: 17.5 * 14 * 3.5cm(30A), 21 * 19.2 * 4cm(50A), 22.6*20*4.8cm(70A)

Features:
LCD Display
PWM Battery charging
All necessary protections equipped.
With 12/24V automatically adapt.
The control parameters can be adjusted to a variety of battery parameters work,easy to adapt to different characteristics
of the battery.
The load control mode can be selected, the timer function can be reset for street light at night.
Overcurrent,short circuit,automatic recovery after protections.
Has a strong charge,constant current,floating three intelligent control.
Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.

Note：
The machine can only be used in LEAD-ACID Battery.
50A 70A controller will display PV and load parameters, which is not available in 30A
This product is a simple controller, the price is cheap, not high-end multifunctional controller, please think twice before purchase!The product doesn't have communication interface temporarily, 

Package included:
1x Solar Charge Controller

USE INSTRUCTIONS
1. The function of the controller is to protect voltage overshoot and overplay.
2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.
3. 12.6V is the recovery discharge voltage.
4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.

If you have trouble in use, try adjusting the float voltage to 13.7V:
First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.
Second, you must press the add button on the screen until the voltage reaches 13.7V.
Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.

Blue MPPT Controller

30/40/50/60/100A MPPT Solar Panel Regulator Charge Controller 12V/24V Auto Focus Tracking

The specifications:

1. Rated voltage: 12/24 V

2. Rated current: 30/40/50/60/100A

3. Maximum voltage PV: 50 V

4. Max! Input power PV: 750 W (12 V) / 1200 W (24)

5. Fit For: Lithium battery, Solid battery, lead-acid battery

Features:

1,MPPT tracking charge automatic focus, high charging efficiency, non-stop detection during loading, bidirectional focus tracking.

2,Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.

3,This controller can charge and discharge at the same time,This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.

4, Three phase charge management, effective battery protection, the battery is more

5,Large LCD screen, adjustable load and discharge parameters,as long as you understand the characteristics of the battery Corresponding charging parameters, you can charge a battery. When the exit is off, It can be adjusted, which is more practical.

Function:

1,Always keep the battery on fill voltage condition.

2,Prevent the battery from over-charging,Prevent the battery from over-discharging.

3,Prevent the battery from reverse charging to solar panels during nights.

4,Reverse Polarity Protection for Battery,Reverse Polarity Protection for Solar Panels,When the battery voltage is low, the controller will automatically cut off the load from the system;If the voltage of battery is back to normal and the load will restart working.

Thunder protection:

1,According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)

2,The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.

Note:

You will have to connect three sets of wires in total, and each set of wires is divided into positive and negative poles.

Connect the battery first, then the solar panel, and finally the load output.

The 12-volt battery is charged with an 18-volt solar panel, and the 24-volt battery is charged with a 36-volt solar panel. As long as the battery is connected, the system will automatically turn on. When the battery is connected, the charging parameters will be automatically set according to the battery voltage

Our Blue controller is the most powerful focus tracking MPPT, with national solar utility invention certificate, product appearance certificate and related certification. A new technology is recognized by everyone and requires users to use and compare. Please be aware when purchasing, this product is to track the current power of the MPPT maximum power point to adjust the internal charging mode to maximize the conversion of light energy into electrical energy. It is not a MPPT that is tracked at a specific value of low voltage or high voltage to constant voltage, so as to avoid misunderstanding. Thank you!

The manual is a general-purpose version. If there are APP operating instructions displayed on the manual, please ignore the instructions in the APP section. Other parameters and settings in the manual are for reference

Package Included:

1 x Solar Panels Battery Charge Controller(Type as your choosed)

1 x User Manual