PYLE PRO PZR 1000 POWER AMPLIFIER
With Owner’s Manual, Set of 60” 14 AWG Copper Speaker Cables
And L/R RCA Interconnect Cable
Here is a very rare PYLE PRO PZR 1000 power amplifier that is in great condition. This amplifier is very clean inside and out and has always been in a non-smoking environment. Plus, this baby sounds absolutely superb with reserve power. This rare and desirable PYLE PRO power amp is in great operating condition. Cosmetically, this PYLE PRO PZR 1000 amp is outstanding except for a few minor scratches on the unit, but you have to look close to see them. The front face is bright and clean, but there is some very small discoloration/pitting – All lights light.
All RCA inputs and XLR inputs have been cleaned – All switches and buttons have been cleaned and lubricated – All Pots have been cleaned and lubed – Interior fan has been cleaned and lubricated.
This amplifier has been cleaned, serviced, tested, and fully detailed!
Listening to this baby is absolutely a dream with power to spare and sonically, the PYLE PRO PZR 1000 amplifier is very impressive with phenomenal stereo separation, depth, imaging, and clarity.
Also comes with an 8 page copy of the owner’s manual, L/R RCA interconnect cable, and set of 60” long 14 gauge copper speaker wires.
PYLE has now introduced the PRO PZR 1000, which puts out 2800 Watts x 1 watts of peak power and 880 continuous watts x 1 watts in BRIDGE/MONO – 1400 Watts x 2 of peak power and 260 continuous watts x 2 in STEREO. The PZR 1000 is capable into low-impedance and otherwise difficult loads. It can deal successfully with such speakers as Apogee Calipers, Magnepan MGIIIs, Acoustat 2+2s, Martin Logan CLSes, and Wilson WATTs.
What's there to say about the PYLE PRO PZR 1000 that hasn't already? Not a whole lot—which is good news indeed.
The overall transparency is excellent. The PRO PZR 1000 sounds smooth in the bass, has a warmish coloration, and soft treble transients. The upper midrange is natural—that old MOSFET mist.
The sound quality of the PZR 1000 power amplifier can hold its own against the best amps! This amp is detailed, beautifully sweet and airy at the top, capable of reproducing remarkable depth and spread, and all that with a truly authoritative low end that can compete with the very best. The separation, stage width, and imaging ability is most excellent. What's more, the soundstage stays deep, wide, and stable, even in loud passages. The control, kick, and impact at the extreme bottom is there, and it will make most speakers shake the walls the way a truly high-powered amplifier can.
The PZR 1000 is very listenable, because the sound is so sweet.
The PYLE PRO PZR 1000 is the power amplifier of choice for the perfectionist on a tight budget. It's a huge triumph of design, and perhaps the most cost-effective power amplifier available.
SPECIFICATIONS:
Continuous Output
Stereo Mode
* 20 HZ to 20 kHz, 8 Ohms------170 Watts x 2
* 1 kHz, 4 Ohms -------------------220 Watts x 2
* Maximum Power, 8 Ohms -----230 Watts x 2
* Maximum Power, 4 Ohms-----260 Watts x 2
* Peak Power, 8 Ohms ---------1400 Watts x 2
Bridge Mode
* 20 HZ to 20 kHz, 8 Ohms-------440 Watts x1
* 1 kHz, 4 Ohms --------------------880 Watts x 1
* Peak Power----------------------2800 Watts x 1
* THD: 0.1% at Rated Output Power
* Frequency Response: 10 Hz-50 kHz
* Input Sensitivity: 1.0V
* S/N Ratio: 100 dB
* Speaker Impedance: Stereo 4-16 Ohms, Bridge 8-16 Ohms
* Power Requirement: 120 VAC, 60 Hz / 230 VAC, 50 Hz
* Dimensions: 3-15/32” H x 19” W x 10-11/16” D
* Weight: 20.5 lbs.
COSMETIC CONDITION:
Very Good
WHAT IS INCLUDED:
PYLE PRO PZR 1000 power amplifier as shown
8 page copy of the owner's manual
Set of 60” long 14 gauge copper speaker wires
L/R RCA interconnect cable