Features
- Double-circuit design limit switch
- Sturdy build with a blend of durable plastic and aluminum casting
- Tight-fitting head and cover in the enclosure
- Compact size with waterproof and oil-resistant features
- Includes an embedded basic switch with a dual-spring mechanism for extended mechanical lifespan
- Offers smooth operation and an extended operating time (OT)
- Features a user-friendly circuit opening design for easy wiring
- Provides a wide range of actuators for effortless customisation
Ratings
| Rated Voltage | Non-inductive load(A) | Inductive load(A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistance load | Lamp Load | Inductive load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125VAC | 5 | 1.5 | 0.7 | 3 | 3 | 2 | 1 | |
| 250VAC | 5 | 1 | 0.5 | 3 | 3 | 1.5 | 0.8 | |
| 500VAC | ||||||||
| 8VDC | 5 | 3 | 3 | 5 | 4 | 3 | ||
| 14VDC | 5 | 3 | 3 | 4 | 4 | 3 | ||
| 30VDC | 5 | 3 | 3 | 4 | 4 | 3 | ||
| 125VDC | 0.4 | |||||||
| 250VDC | 0.2 | |||||||
| Inrush curent | N.C.:24A, N.O.:12A N.C.:below 24A, N.O.:below 12A |
|||||||
Contact Form
- Open
Open - Close
Close
- Notes:
- Inductive load has a power factor of 0.4 min(AC)and a time constant of 7 ms.
- Lamp load has inrush current of 10 times the steady-state current, while motor load has an inrush current of 6 times the steady-state current.
Characteristics
| Operation speed | 1mm-2m/sec | 1mm-2m/sec |
|---|---|---|
| Operation Frequency | M120opm,E30opm | Mechanical:120operations/minute, Electrical:30operations/minute |
| Contact resistance | 25MΩ | 25MΩ max (initial value) |
| Insulation resistance | 100MΩ 500VDC | 100MΩ min (at500VDC) |
| Dielectric strength | 1000VAC , 50/60Hz | 1000VAC , 50/60Hz For 1 minute between terminals of the same polarity |
| 1500VAC , 50/60Hz | 1500VAC , 50/60Hz For 1 minute between current-carrying and non current-carrying metal parts | |
| 1500VAC , 50/60Hz | 1500VAC , 50/60Hz For 1 minute between each terminal and ground | |
| Vibration | 10-50Hz,1.5mm | 10-50Hz,1.5mm double amplitude |
| Shock | 1000m/Sec2(100G'S) | Mechanically durable:1000m/Sec2(about 100G' S) |
| 300m/Sec2(30G'S) | Malfunction:300m/Sec2(about 30G' S) | |
| Ambient temperature | -5-+65°C | Use:-5-+65°C |
| Humidity | 95%RH | <95%RH |
| Life | 10,000,000(OT) | Mechanical:100,000,000 operations above(under rated OT) |
| 500,000 | Electrical:500,000 operations above | |
| Weight | 130-190 | About 130-190g |
| Degree of Protection | IP66 | IP66 |
Operating Characteristics
| Type | ME-8104 | ME-8108 | ME-8107 | ME-8111 | ME-8112/8122 | ME-8166/8167/8168 |
|---|---|---|---|---|---|---|
| OF(max) | 750g | 750g | 750g | 900g | 900g | 150g |
| RF(min) | 100g | 100g | 100g | 150g | 150g | - |
| PT(max) | 20 ° | 20 ° | 20 ° | 1.5mm | 1.5mm | 30mm |
| OT(min) | 50 ° | 50 ° | 50 ° | 4mm | 4mm | - |
| MD(max) | 12 ° | 12 ° | 12 ° | 1mm | 1mm | - |
| OP | - | - | - | 26+-0.8mm | 37+-0.8mm | - |
STORE CATEGORIES
25mm D.O.C Annular Cutter50mm D.O.C Annular Cutter50mm D.O.C Imperial Annular75 mm D.O.C Annular CutterAnnular AccessoriesABS Junction BoxArbors, Adaptors and ChucksBroken Bolt & Stud RemovalBoring Heads and KitsCollet KitsDrill BitsElectricalGrab KitsHand ReamersKnee PadsLathe ToolingMachining AccessoriesMeasuring EquipmentPlumbing & SuppliesReducers Adaptors & ExtensionsSlitting SawsSwitches & IsolatorsThread RepairTool Holding ClampingTool Kits and SetsVentilation & Access Panels
ME-8104 Micro Limit Switch with Adjustable Lever Roller Arm
PRODUCT DESCRIPTION
Features
- Double-circuit design limit switch
- Sturdy build with a blend of durable plastic and aluminum casting
- Tight-fitting head and cover in the enclosure
- Compact size with waterproof and oil-resistant features
- Includes an embedded basic switch with a dual-spring mechanism for extended mechanical lifespan
- Offers smooth operation and an extended operating time (OT)
- Features a user-friendly circuit opening design for easy wiring
- Provides a wide range of actuators for effortless customisation
Ratings
| Rated Voltage | Non-inductive load(A) | Inductive load(A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistance load | Lamp Load | Inductive load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125VAC | 5 | 1.5 | 0.7 | 3 | 3 | 2 | 1 | |
| 250VAC | 5 | 1 | 0.5 | 3 | 3 | 1.5 | 0.8 | |
| 500VAC | ||||||||
| 8VDC | 5 | 3 | 3 | 5 | 4 | 3 | ||
| 14VDC | 5 | 3 | 3 | 4 | 4 | 3 | ||
| 30VDC | 5 | 3 | 3 | 4 | 4 | 3 | ||
| 125VDC | 0.4 | |||||||
| 250VDC | 0.2 | |||||||
| Inrush curent | N.C.:24A, N.O.:12A N.C.:below 24A, N.O.:below 12A |
|||||||
Contact Form
- OpenOpen
- CloseClose
- Notes:
- Inductive load has a power factor of 0.4 min(AC)and a time constant of 7 ms.
- Lamp load has inrush current of 10 times the steady-state current, while motor load has an inrush current of 6 times the steady-state current.
Characteristics
| Operation speed | 1mm-2m/sec | 1mm-2m/sec |
|---|---|---|
| Operation Frequency | M120opm,E30opm | Mechanical:120operations/minute, Electrical:30operations/minute |
| Contact resistance | 25MΩ | 25MΩ max (initial value) |
| Insulation resistance | 100MΩ 500VDC | 100MΩ min (at500VDC) |
| Dielectric strength | 1000VAC , 50/60Hz | 1000VAC , 50/60Hz For 1 minute between terminals of the same polarity |
| 1500VAC , 50/60Hz | 1500VAC , 50/60Hz For 1 minute between current-carrying and non current-carrying metal parts | |
| 1500VAC , 50/60Hz | 1500VAC , 50/60Hz For 1 minute between each terminal and ground | |
| Vibration | 10-50Hz,1.5mm | 10-50Hz,1.5mm double amplitude |
| Shock | 1000m/Sec2(100G'S) | Mechanically durable:1000m/Sec2(about 100G' S) |
| 300m/Sec2(30G'S) | Malfunction:300m/Sec2(about 30G' S) | |
| Ambient temperature | -5-+65°C | Use:-5-+65°C |
| Humidity | 95%RH | <95%RH |
| Life | 10,000,000(OT) | Mechanical:100,000,000 operations above(under rated OT) |
| 500,000 | Electrical:500,000 operations above | |
| Weight | 130-190 | About 130-190g |
| Degree of Protection | IP66 | IP66 |
Operating Characteristics
| Type | ME-8104 | ME-8108 | ME-8107 | ME-8111 | ME-8112/8122 | ME-8166/8167/8168 |
|---|---|---|---|---|---|---|
| OF(max) | 750g | 750g | 750g | 900g | 900g | 150g |
| RF(min) | 100g | 100g | 100g | 150g | 150g | - |
| PT(max) | 20 ° | 20 ° | 20 ° | 1.5mm | 1.5mm | 30mm |
| OT(min) | 50 ° | 50 ° | 50 ° | 4mm | 4mm | - |
| MD(max) | 12 ° | 12 ° | 12 ° | 1mm | 1mm | - |
| OP | - | - | - | 26+-0.8mm | 37+-0.8mm | - |
We are a small Australian based company with a sense of pride in our products and the service we provide. Founded by professionals within the construction industry, we understand and appreciate the importance of quality and safety. We welcome feedback, questions and special requests. Is there a product you would like us to add to our range? Send us a message.
Ebay has a variety of payment methods and we would encourage payment within EBAY. Please note a GST receipt will be supplied on request or can be downloaded from within your EBAY purchase history.
Please note delivery times to remote and very remote (Zone 3 and 4 postcodes) destinations around Australia will have longer delivery times due to postal processing and the distance to destination. Our handling time will remain as; same day dispatch on all orders placed before 8am, ensuring you receive your item as quickly as possible.
We offer a full refund up to 30 days from the date of receipt. A full refund can be made once the item(s) has been returned. We will ask for a photo for any defective item Note that the buyer is responsible for return postage. We will do everything to ensure that you are happy with your product and encourage feedback through our contact page
