Schneider Electric Tesys F 400A LC1F400 Contactor Tripolar Contactor 3P - NEW
Contactors are installed in high voltage equipment and expected to be installed or/and tested by a professional electrician or qualified engineer. XELL LTD take no liability or returns if this item is handled by a non-qualified person.
Xell Limited is a company registered in England and Wales Company number: 13715501 Registered office: 20-22 Wenlock Road, London, N1 7GU
VAT number: GB 408 5946 71
*** Xell ltd is not on the Schneider Electric approved distributors list ***
SPECS
Primary
Product Line
TeSys F
Type of product or component
contactor
Abbreviated device name
LC1F
Range
TeSys
Control Circuit Voltage
48...440 V DC with LX4 coil
Composition of pole contacts
3 IN
Product Name
TeSys F
Category of use
CA-1
Contactor Application
Resistive Load
Average Impedance
0.26 MOhm – Ith 500 AT 50 Hz
Complementary
IRMS Nominal Closing Capacity
4000 A AC to IEC 60947-4-1
Associated Fuse Rating
400 A aM at <= 440 V
Maintenance power consumption in VA
VA 2.5-4.0
Control Circuit Voltage Limits
Operating: 0.85...1.1 Uc AC 40..0.400 Hz
Maximum operating rate
2400 cic/h at <55 °C
[ICW] Permissible short-term rated current
1000 A at <40 °C - 10 min
Power dissipation per pole
42 W AC-3
Mechanical durability
10 Mcycles
Mounting Bracket
plate
Width
213 mm
Height
206 mm
Depth
219 mm
Description of Poles
3P
[EU] Rated Operating Voltage
<= 1,000 VAC 50/60 Hz
Irruption power in VA
360-470 VA, 50/60 Hz cos phi 0.5 (at 20 °C)with LXE coil
Working time
6...54 ms Aperture of with LXE coil
IP degree of protection
IP20 front face with shrouds to IEC 60529
Weight
8 kg
[IE] Rated Operating Current
400 TO 55 °C at <= 440 V AC AC-3
[ITH] Conventional Outdoor Thermal Current
500 A at <40 °C
[UI] Rated Insulation Voltage
1000 V to IEC 60947-4-1
[UIMP] Rated impulse withstand voltage
8 kV
Nominal Cutting Capacity
3200 A to IEC 60947-4-1
Gamma Compatibility
LC1F
Connections - Terminals
Control Circuit: Threaded Clamp Terminals 1 cable(s) 1-4 mm²
Tightening torque
Control circuit: 0.6 N.m
Environment
Overvoltage Category
III
Product Certifications
ABS
IP degree of protection
IP20 front face with shrouds to IEC 60529
Standards
EN 60947-1
Ambient temperature of air for storage
-60-80°C
Ambient air temperature for operation
-5-55°C
Protective treatment
TH
Heat dissipation
2.2-5.5 W
Mechanical Strength
Contactor shocks open: 6 Gn for 1/2 sine wave (11 ms)
Permissible ambient air temperature around the device