When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay.

2 Wheel Adapters 5x4.5 to 4x4.5 ¦ Older Mustang 4 Lug Wheels On 5 lug MUSTANG

This product data sheet is originally written in English.



 



2 PC WHEEL ADAPTER
5X4.5 INCH/4x4.5 INCH 

PUT 4 LUG OLDER MUSTANG WHEELS ON COBRA RANGER

1.75" THICK

M12x1.5 THREAD SIZE STUDS

 

VEHICLE BOLT PATTERN  CHANGE BOLT PATTERN


 WHEEL BOLT PATTERN

5x4.5" (5x114.3 MM)

 

4x4.5" (4x114.3 MM)

 

 

PRODUCT SPECIFICATION: 

  • Set of 2 High Quality Forged 6061 Billet Wheel Adapters - enough for one axle
  • Vehicle Side Bolt Pattern: 5x4.5" (5x114.3mm) 
  • Wheel Side Bolt Pattern: 4x4.5" (4X114.3mm) 
  • Thickness: 1.75 inch (45mm)
  • Studs Thread Size: M12x1.5
  • Center Bore: 73mm
  • Stud Grade: 10.9
  • 2 Piece Conversion Type Adapter
  • Material: Forged 6061-T6 Aircraft Billet  

    •  

    WHY ARE WE SPECIAL

  • We literally make adapters. Custom order is welcome.
  • We ship internationally as well.
  • Experienced technical staff provides professional advice.
  • Our great customer service guarantees a smooth and easy shopping experience.
  • Quality control department ensures quality and reliable products.

    •  

    SPECIAL NOTES 

  • Hand torque the black Allen bolts at 50 ft-lbs. Avoid using air guns.
  • The back of the wheel must be mounted completely flush against the surface of the adapters.
  • Check your clearance and make sure you have room for the 2" adapter.
  • You need two sets of lug nuts for these adapters to work. One set of open end lug nuts to bolt the inner piece of the adapters to the vehicle and one set of appropriate lug nuts to bolt your wheels to the studs of the adapters.
  • Use proper torque for open end lug nuts to your vehicle and lug nuts to adapter studs. Use 95 ft-lbs for 14mm studs, 80 ft-lbs for 12mm studs and 85 ft-lbs for 1/2" studs.
  • If vehicle studs stick out past the surface of the adapter, it may need to be shaved down so that wheels can mount flush. They can easily be ground or trimmed.
  • Sometimes installation of this type of adapter may require some kind of modification for certain vehicles.

    •  

    VEHICLE SIDE FITMENT

  • Ford CROWN VICTORIA
  • Ford MUSTANG (ALL 5 LUGS)
  • Ford PROBE
  • Ford ESCAPE
  • Ford EXPLORER
  • Ford RANGER: 1981-ON
  • Ford FULL SIZE (GALAXIE, T-BIRD, ETC)
  • Ford BRONCO II: 1982-1990
  • Jeep CHEROKEE: 1980-ON
  • Jeep GRAND CHEROKEE: 1993-1998
  • Jeep WRANGLER: 1980-2006
  • Jeep LIBERTY: 2002-ON
  • Lincoln CONTINENTAL: 1968--1972
  • Lincoln MARK III: 1968-1972
  • Dodge ALL FULL SIZE (CORONET, MONACO, POLARA, POLARA, ETC): 1955-1977
  • Dodge AVENGER
  • Dodge INTREPID
  • Dodge STEALTH
  • Dodge GRAND CARAVAN
  • Dodge CARAVAN: 1987-ON
  • Dodge DAKOTA: 1987-1990

    • FITMENT & COMPATIBILITY IS FOR THE PURPOSE OF VERIFYING VEHICLE SIDE BOLT PATTERN ONLY



    Usually ships within 24 hours after payment is made. No orders are shipped over weekend.

     

    We gladly accept PayPal and all major credit cards Visa, Master, Dicover and AMEX via PayPal. California buyers need to pay California sales tax.

    Powered by SixBit
    Powered by SixBit's eCommerce Solution
    You need two sets of lug nuts for these adapters to work. One set of open end lug nuts to bolt the inner piece of the adapters to the vehicle and one set of appropriate lug nuts to bolt your wheels to the studs of the adapters. Use proper torque for open end lug nuts to your vehicle and lug nuts to adapter studs. Use 95 ft-lbs for 14mm studs, 80 ft-lbs for 12mm studs and 85 ft-lbs for 1/2" studs. If vehicle studs stick out past the surface of the adapter, it may need to be shaved down so that wheels can mount flush. They can easily be ground or trimmed. Sometimes installation of this type of adapter may require some kind of modification for certain vehicles. We gladly accept PayPal and all major credit cards Visa, Master, Dicover and AMEX via PayPal. California buyers need to pay Cali
    Warranty Yes
    Wheel Bolt Pattern 4x114.3/4x4.5"
    Interchange Part Number 5x4.5 to 4x4.5, 5x114.3 to 4x114.3
    Placement on Vehicle Front, Rear
    Placement on Vehicle Left
    Placement on Vehicle Right
    Brand EZAccessory
    Manufacturer Part Number 5450-4450Z
    Thickness 2" (50mm)
    UPC 849277035250
    Hub Bore 73.1mm
    Vehicle Bolt Pattern 5x114.3/5x4.5"
    Manufacturer Warranty Yes
    Other Part Number CHANGE BOLT PATTERN
    Studs Thread Size M12mmx1.5