2 PC WHEEL ADAPTER
5X4.75 INCH/6x120mm

PUT 6 LUG SILVERADO WHEELS ON S10 BLAZER

2" THICK

14x1.5 THREAD SIZE STUDS

 

VEHICLE BOLT PATTERN  CHANGE BOLT PATTERN


 WHEEL BOLT PATTERN

5x4.75" (5x120.7 MM)

 

6x120 MM

 

 

PRODUCT SPECIFICATION: 

  • Set of 2 High Quality Forged 6061 Billet Wheel Adapters - enough for one axle
  • Vehicle Side Bolt Pattern: 5x4.75" (5x120.7mm) 
  • Wheel Side Bolt Pattern: 6x120mm
  • Thickness: 2 inch (50mm)
  • Studs Thread Size: 14x1.5
  • Center Bore: 74mm
  • Stud Grade: 10.9
  • 2 Piece Conversion Type Adapter
  • Material: Forged 6061-T6 Aircraft Billet  

    •  

    WHY ARE WE SPECIAL

  • We literally make adapters. Custom order is welcome.
  • We ship internationally as well.
  • Experienced technical staff provides professional advice.
  • Our great customer service guarantees a smooth and easy shopping experience.
  • Quality control department ensures quality and reliable products.

    •  

    SPECIAL NOTES 

  • Hand torque the black Allen bolts at 50 ft-lbs. Avoid using air guns.
  • The back of the wheel must be mounted completely flush against the surface of the adapters.
  • Check your clearance and make sure you have room for the 2" adapter.
  • You need two sets of lug nuts for these adapters to work. One set of open end lug nuts to bolt the inner piece of the adapters to the vehicle and one set of appropriate lug nuts to bolt your wheels to the studs of the adapters.
  • Use proper torque for open end lug nuts to your vehicle and lug nuts to adapter studs. Use 95 ft-lbs for 14mm studs, 80 ft-lbs for 12mm studs and 85 ft-lbs for 1/2" studs.
  • If vehicle studs stick out past the surface of the adapter, it may need to be shaved down so that wheels can mount flush. They can easily be ground or trimmed.
  • Sometimes installation of this type of adapter may require some kind of modification for certain vehicles.

    •  

    VEHICLE SIDE FITMENT

     

  • Cadillac: Eldorado [79-85], Seville [79-85]
  • Chevrolet: Camaro [82-02], Corvette [91-14], S10 [82-04], S10 Blazer [83-94]
  • GMC: S15 [82-90], S15 JIMMY [83-91], Sonoma [91-04]
  • Pontiac: Firebird [67-97], Grand Prix [62-87]
  • Fit on Chevy Corvette hub/axle and install wheels from 2019 Chevy Colorado
  • Fit on Chevy S10 hub/axle and install wheels from 2016 Chevy Colorado

    • FITMENT & COMPATIBILITY IS FOR THE PURPOSE OF VERIFYING VEHICLE SIDE BOLT PATTERN ONLY



    Usually ships within 24 hours after payment is made. No orders are shipped over weekend.

     

    We gladly accept PayPal and all major credit cards Visa, Master, Dicover and AMEX via PayPal. California buyers need to pay California sales tax.

    Powered by SixBit
    Powered by SixBit's eCommerce Solution
    You need two sets of lug nuts for these adapters to work. One set of open end lug nuts to bolt the inner piece of the adapters to the vehicle and one set of appropriate lug nuts to bolt your wheels to the studs of the adapters. Use proper torque for open end lug nuts to your vehicle and lug nuts to adapter studs. Use 95 ft-lbs for 14mm studs, 80 ft-lbs for 12mm studs and 85 ft-lbs for 1/2" studs. If vehicle studs stick out past the surface of the adapter, it may need to be shaved down so that wheels can mount flush. They can easily be ground or trimmed. Sometimes installation of this type of adapter may require some kind of modification for certain vehicles. We gladly accept PayPal and all major credit cards Visa, Master, Dicover and AMEX via PayPal. California buyers need to pay Cali