LOT of 4 Anderson power pole snap in panel mount housings.

Ideal for mounting PowerPole Connectors on existing cabinets & panels

These have PowerPole housings installed in them with cut wires, you can simple pop the pin out and install your own 4 PowerPole housings Very easy.(see photos showing this)

Or if your familiar with Anderson PowerPole connector's you can remove the used contacts from the individual housings and reuse them as well (with new crimp on contacts NOT included.)

These housing are 12$ each from Anderson! Many uses for these!

DESIGNED FOR PANELS .030-.134" (.76 - 3.4mm) THICK.

KNOCKOUT SIZE 1.00 X 1.25 (25.4 X 31.7mm)

If you were going to remove the used electrical contacts from these Anderson sells a extraction tool for 10$ that works very well..

These housing's work with PowerPole 15/30/45 as the only difference is the size of the metal contacts, housing are all the same.

For those more advanced Anderson users, there is 2 pin locations on the panel mount housing to make these act as male or female panel mount connections (shown in last photo)