Notice:Magnetic stripe size is 12.7mm,not 8.4mm.
Main
outcome measures:
● organization mode of 256 byte EEPROM
●
32-bit protection memory composition mode
●
3-byte user password, password error count: 3 times
●
temperature range: 0 ℃-70 ℃
•
At least 100,000 times in the case
●
data retention period of at least 10 years
●
minimum write/wipe Time: 2.5ms
●
Working voltage: 5V
●
maximum power supply current: 10mA
factory
solidified user code 32 bytes write protection data area
security
features:
1.
Each byte of the write protection zone (the first 32 bytes) can be write
protected separately. After write protection, the content cannot be changed
(that is, solidified data)
2.
Before the password is checked correctly, all data can be read. If necessary,
the data can be properly encrypted.
3.
After checking that the password is correct, it can be written or
modified.
4.
The user password of three bytes can be changed after being checked correctly,
valid until the card is powered off.
5.
Password error counter. The initial value is 3. If the password check error
occurs once, it will be reduced by 1. If the counter value is 0, the card will
be locked automatically and the data can only be read, no more changes can be
made or password verification can be performed; If it is not zero, once the
password verification is correct, it can be restored to the initial
value.
6.
Byte addresses 0-5, 6-7 have been written by the manufacturer before leaving the
factory and cannot be changed.