Clean Storm 20161205 Universal Vacuum Booster SBM-Booster (Machine Mount)
Description
Drastically reduces dry time with power wands like the RotoVac 360 as well as all the other RotoVac models that use lots of water
Works with almost every brand extractor including but not limited to:
Mytee, Breeze, Sandia Plastic, Hydroforce, MasterBlend, Century 400 Diamondback, Drieaz, PowerFlite, Prochem, Castex, Intrepid, Nilfisk Multi HSC 585, Prospector, and US Products
For US Products and Nilfisk machines - please let us know because we have to make the unit 1.5" taller!
Universal Vacuum Booster for Carpet and Upholstery Cleaning Machines New easy install vacuum booster adds the performance you always wanted at a reasonable price.
This will get carpet drier and allow you to operate at longer lengths of hose without suction loss.
Fits on any portable that uses a black twist lock or 6" clear screw in lid. For portables with 6" clear screw in lid, simply remove your clear 6" screw in lid and replace it with this screw in booster. Portables with the black twist lock lid, this booster includes the replacement outer black ring to convert to a 6" screw in lid. When converting machines with a black twist and lift lid to screw in lid, we recommend you purchase an additional clear screw in lid (link below.) or simply use butterfly bolts or fender washers to grab the plastic all the way around the lip opening.
Please note that boosters will increase you CFM of you machine an not the max inches of lift. Booster will increase you "use" inches of lift not your max inches of lift. Max inches of lift is taken at zero cfm, "use" inches of lift means with 100 feet of hose with a wand lip on the carpet (fabric) that is a leaking air through and around that fabric (not a perfect seal.) Booster will usually double you maximum hose length for cleaning and decrease your dry times.
Ear protection recommended if using in the same room as the cleaning.
Learn about boosters in our forum HERE
Specifications
- 11" Height X 10" Diameter.
- Rust Free Aluminum Dome. Can be made as low as 8.5" if we mount the protective aluminum cover as low as possible and do not mount a handle
- Stainless Steel Fasteners and Switch.
- Amps: 11 Weight: 11 lbs (includes power cord)
- 220 volt available for $200 more.
- Average amp draw 10.9 Amps @ 120 volts
- Max CFM: 104.4
- Max Inches of Lift: 136.9"
- Vacuum unit rating: 14,292
- Max RPM 25,866
Installed or provided parts:
 | Factory Installed Electro Motor: Model Q6600-090A-MP-26 3 stage, 120V Flat Fan-Vacuum Motor |
 | Free Dealer Provided Extension Power Cord 14-3 X 25 feet Heavy duty Mytee E532 D16614025 SW141 315-05 |
 | Factory Installed Clean Storm Panel Mount 15 amp push button resettable breakers PP140624 PP33-900236 PHY018-003 |
 | Factory installed 6 inch Waste Tank Lid Universal Vacuum Lid Flat top (this is the base of the system) When converting from Black Twist Lid to screw in lid, be sure to purchase and extra lid so you can continue to use your machine without the booster. |
 | Factory installed Switch Toggle Stainless W/ Spade Connect Single Pole Single Throw Approved for 20 amp 125 volts or 12 amps 250 volts SPST 39008774507 |
 | Factory Installed Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor |
 | Factory Installed Gasket for 5.7" Vacuum Motor 1/8" Thick 5.5" OD X 4" ID 035-207-00 |
 | Factory installed Cord Male Pigtail 12-3 13 inches over all length 10-0838 |
To see your vacuum performance increase, see chart below.
| Current Configuration | Current Vacuum Units | With Booster-Vacuum Units | % Improvement |
| Single 2 Stage | 85" X 100 CFM = 8500 | 85" X 200 CFM = 17000 | 100% |
| Single 3 Stage | 125" X 100 CFM = 12500 | 125" X 200 CFM = 25000 | 100% |
| Dual 2 Stage In Series | 155" X 100 CFM = 15500 | 125" X 200 CFM = 25000 | 61% |
| Dual 2 Stage in Parallel | 85" X 200 CFM = 17000 | 85" X 300 CFM = 25500 | 50% |
| Dual 3 Stage in Series | 185" X 100 CFM = 18500 | 125" X 200 CFM = 25000 | 35% |
| Dual 3 Stage In Parallel | 125" X 200 CFM = 25000 | 125" X 300 CFM = 37500 | 50% |
| Triple 2 Stage In Series | 185" X 100 CFM = 18500 | 125" X 200 CFM = 25000 | 35% |
| Triple 2 Stage In Parallel | 85" X 300 CFM = 25500 | 85" X 400 CFM = 34000 | 33% |
| Triple 3 Stage In Series | 191" X 100 CFM = 19100 | 125" X 200 CFM = 25000 | 31% |
| Triple 3 Stage In Parallel | 125" X 300 CFM = 37500 | 125" X 400 CFM = 50000 | 33% |
| Quad 2 Stage Series Pair | 165" X 200 CFM = 33000 | 125" X 300 CFM = 37500 | 14% |