You are buying a BEAUTIFUL: ARCAM FMJ P7 MULTI CHANNEL POWER AMPLIFIER
The condition is used, but it’s in excellent working condition has been tested.
You need an adapter to plug the cord or buy it separately in order to plug in US power switch.
ARCAM FMJ P7 MULTI CHANNEL POWER AMP - Product Description
The ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.
A completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 microfarads of storage capacitance, fed from a total of 14 individual windings on the p7's two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcam's award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.
The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.
As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled "softstart" sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.
The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7's feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.
THX certified Multi-Channel power amplifier
Delivers a massive 150W per channel into 8 Ohms
Near perfect channel isolation prevents signal distortion
Can be daisy chained for Bi or even Tri-amping
Multi-coloured LED display
12V trigger for remote activation
Specification
く
Brands: Arcam
Product Specifications:
Total harmonic distortion 0.005%
Dimensions (HxWxD)
in mm 430x460×180
Input impedance 22 Ohms
Output impedance 50 milliohms
Frequency Response
1 20Hz-20kHz
Component Output 150W per channel into 8 Ohms
Weight 31 kg
Pictures are part of the description so please see them carefully and make your own conclusion about the item’s
WHAT YOU SEE IS WHAT YOU GET
Thanks for looking selling as the pictures shown.
ABOUT SHIPPING
Shipping Within US 48 Continental States Only (No shipping to Puerto Rico, Alaska, Hawaii) will be shipped by Fedex UPS Or USPS Ground according your location with free tracking number and It will be shipped thru the address provided by eBay so please make sure it's right during checkout!
Feel free to any questions.
NOT SHIPPING TO P.O BOX ADDRESSES
For International buyer we will use eBay Global shipping option no exceptions.
ABOUT RETURN
Please contact seller if you have any inconvenience with your item, before open an eBay case or leave a negative feedback (There are many ways to solve any issue)
Is very important for Us make our costumers happy’s.
Buy with confidence
☆☆☆☆☆TOP SELLER ☆☆☆☆☆
• See other items in our eBay page!!!
https://www.ebay.com/str/jarvingracestore