General information Product function ● Isochronous mode Yes Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 80mA from backplane bus 3.3 V DC, max. 10 mA output voltage / header supply voltage of the transmitters / header ● present No Power loss Power loss, typ. 1.2 W Address area Address space per module ● Address space per module, max. 4 byte Analog outputs Number of analog outputs 2 Voltage output, short-circuit protection Yes Voltage output, short-circuit current, max. 25 mA Cycle time (all channels) max. 0.5 ms; At max. 0.5 µF Output ranges, voltage ● 1 V to 5 V Yes ● -5 V to +5 V Yes ● -10 V to +10 V Yes Connection of actuators ● for voltage output two-wire connection Yes ● for voltage output four-wire connection Yes Load impedance (in rated range of output) ● with voltage outputs, min. 1 kΩ ● with voltage outputs, capacitive load, max. 0.5 µF Destruction limits against externally applied voltages and currents ● Voltages at the outputs towards MANA 15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20) Cable length ● shielded, max. 200 m; 100 m if Twa < 2 ms Analog value generation for the outputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit; 15 bit + sign Settling time ● for resistive load 0.2 ms ● for capacitive load 0.5 ms; At max. 0.5 µF