USED ​​BUT WORKS WITHOUT PROBLEMS, power supply is not included, you will have what you see in the photo

Digiweigh Readout DWP-102N NTEP, Legal For trade indicators for general use The DIGIWEIGH DWP-102N weighing indicator is an NTEP approved (6000 divisions) easy to use indicator which can be used with floor scales, bench scales, pallet truck scales, forklift scales and other scales. It has an internal resolution of 300,000 counts and 50,000 external counts. It has a large LED display that is bright and gives great visibility that is independent of the ambient lighting conditions. It can be connected to a computer with help of an RS-232 port. It can also be integrated in a network. The DIGIWEIGH DWP-102N weighing indicator has a swivel stand and can be placed on the desk or if desired mounted on the wall with a bracket. For a very low additional charge you can get a compatible desktop software. The full scale input signal is 30mV which includes the dead load The minimum sensitivity is 1.0uV / grad The input impedance is 30mΩ, typical It has an internal resolution of 300,000 counts and 50,000 external counts. The display resolution is 50,000 max The measurement rate is 10 Meas / sec The system linearity is within 0.02% of FS The calibration method is software calibration Excitation Voltage : +10V DC, 4 x 350Ω load cells The digital filtering is software selectable Serial Port : Full Duplex, 1200, 2400, 4800, 9600, 19200 Baud The display is 0.56” 7-segment LED display showing 6 digits Additional symbols include Net, Gross, Stable, Tare, lb, kg, Zero, PCS It has a 14-key flat membrane panel keyboard Power: 9V DC, 500mA Femal & Rechargeable battery The operating temperature is : -10 - 40C Operators Manual: Indicator