The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado.
There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.
Note:
The only difference between the Cmod A7-15T and Cmod A7-35T are the capabilities of the FPGA found on the board. They compare as follows:
Cmod A7-15T | Cmod A7-35T | |
---|---|---|
FPGA part | XC7A15T-1CPG236C | XC7A35T-1CPG236C |
1 MSPS On-chip ADC | Yes | Yes |
Programming options | Quad-SPI Flash/JTAG | Quad-SPI Flash/JTAG |
Look-up Tables (LUTs) | 10,400 | 20,800 |
Flip-flops | 20,800 | 41,600 |
Block RAM | 112.5 KB | 225 KB |
Clock Management Tiles | 5 | 5 |
We would be grateful if you could leave a positive feedback at your earliest convenience.
We reward your positive feedback and your payment with a positive feedback automatically.
Ebay should manage combined shipment of different items automatically.
Please contact us before payment if you need any further assistance.
The following purchases are typically VAT exempted:
If you are eligible for VAT exemption, please contact us BEFORE payment.
References: