Possible presence of purely aesthetic defects, which do not affect use, such as small pixel defects (ISO-9241-3xx standards), microscratches on the body/screen and/or other defects not visible more than 30cm from the object resulting however from wear of the object over time; the hardware is however tested, working and guaranteed (see product condition details)
General informations
Reactive power: 650VA
Warranty: 1 year (Simpletek)
Purchase invoice: must be requested at the same time as the order and will be sent via email. In the absence of billing data, a receipt will be issued which cannot be cancelled.
ATTENTION: NEW battery.
Description
PRODUCT FEATURES
Status Display: There are LED status displays that allow you to have a quick and clear picture of the power status; while acoustic alarms signal changes in the conditions of the UPS and the mains power supply. Thanks to automatic tests, it is possible to know in advance when a battery needs to be replaced, thus optimizing: performance, duration and reliability of the battery itself. In the event of their failure, it is possible to find out about it thanks to a preventive analysis which favors timely maintenance interventions. Finally, the secondary electronics protect against peaks without reducing the charge of the battery itself for the operation of the primary electronics during a blackout.
Connectivity: Serial: Allows management of the UPS through a serial port. USB: Offers the possibility of managing the UPS through the USB port.
Exit: Output power capacity: 400Watt/650VA Configurable maximum power (watts): 400Watt / 650VA Rated output voltage: 230V Output frequency (synchronized with mains power): 47 – 63 Hz Output frequency (unsynchronized): 50/60 Hz +/-1 Hz Topology: Standby Waveform type: Sinusoid approximation
Output Connections: IEC 320 C13 (selector_surgetitle) IEC Jumpers (selector_surgetitle) IEC 320 C13 (Battery backup) Transfer time: 6ms typical, 10ms maximum
Entrance: Input connection type: 230V Input Frequency: 47 – 63 Hz, 50/60 Hz ±3 Hz (automatic detection) Plug type: IEC-320-C14 Input voltage range for operation: 180 – 266V Adjustable input voltage range for main operation: 160 – 286V Number of power cables: 2 Maximum input current: 7.0A
Communications & Management: Interface port(s): Optional Simple Signaling RS232 cable, USB Control panel: LED status display with active line, active battery, battery to replace and overload indicators Audible alarm: Alarm with battery operation, distinct low battery alarm, continuous tone alarm in case of overload
Surge Protection: Peak energy classification: 310Joule Data line protection: Analog telephone line for telephone/fax/modem/DSL (RJ45 connector)
Physical characteristics: Maximum height: 16.5cm Maximum width: 9.1cm Maximum depth: 28.4cm Weight: 6.5kg
Environmental conditions: Operating temperature: 0 – 40°C Operating relative humidity: 0 – 95% Operating height: 0-3000 meters Storage temperature: -15 – 45°C Storage relative humidity: 5 – 95% Storage height: 0-15000 meters Perceivable noise 1 meter from the surface of the unit: 45dBA
Possible presence of purely aesthetic defects, which do not affect use, such as small pixel defects (ISO-9241-3xx standards), microscratches on the body/screen and/or other defects not visible more than 30cm from the object resulting however from wear of the object over time; the hardware is however tested, working and guaranteed (see product condition details) Status Display: There are LED status displays that allow you to have a quick and clear picture of the power status; while acoustic alarms signal changes in the conditions of the UPS and the mains power supply. Thanks to automatic tests, it is possible to know in advance when a battery needs to be replaced, thus optimizing: performance, duration and reliability of the battery itself. In the event of their failure, it is possible to f