Wiring Harness for Rickenbacker 340/370/350SH 5-Control Guitars

 I custom build my harnesses using components from the same suppliers that Rickenbacker also uses, and optimize this one for use with 3 stock Hi-Gain, or Toaster single coil pickups. Instead of running the neck and middle pickups on the same circuit, with the 5th control as a fader for them, the neck pickup is on one circuit, the bridge pickup is on another, and the middle pickup volume is controlled by the 5th knob. this way it can be mixed with the other two pickups at any volume desired, or even soloed if the other two volumes are turned down. The tone caps are Sprague .047uF spec units, while the pickup selector is made by Switchcraft. Unlike the factory harness, these pots are within 5% of rated spec, and matched in pairs to within 1% of each other. The tone pots are solid shaft 500K CTS units, while the volume pots are the same with a 250K rating, and the output is made by Switchcraft. It's all wired up with vintage style cloth insulated 22gauge wire. This harness is ideal for any Rickenbacker 3 pickup guitar with the 5-control harness, single coil pickups and mono output. This harness is available with stereo/mono output jacks for $10 more. I can build a custom harness for most Rickenbacker guitars and basses. Any questions, please ask!

***