4 Axis USB 6040 CNC Router Engraving Drilling Machine DIY Engraving Device 1.5KW
Notes:Please prepare a computer with USB Interface.
DESCRIPTION:
Outside dimension65*158mm
Material304 stainless steelCopper coilPressure cast aluminum pipe water jacket
VOLTScurrentpower AC110V-220V/50Hz5A,1.5KW VFD
Spindle speed : 24000 rpm
Max working frequency : 400Hz
Principal axis collet: ER11colletStandard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency
from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface:through USB connection with computer
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Material304 stainless steelCopper coilPressure cast aluminum pipe water jacket
VOLTScurrentpower AC110V-220V/50Hz5A,1.5KW VFD
Spindle speed : 24000 rpm
Max working frequency : 400Hz
Principal axis collet: ER11colletStandard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency
from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface:through USB connection with computer
Support system:Windows XP WIN7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Pack List:
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*24mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
1X Manual
Description
Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver.
It's suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,
Aluminum material,Copper, Iron.
1.This 6040T machine is suitable for industry, Technology Research, Advertising Design,
Arts Creation, Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other
plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave them into
3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4.The mini router Frame is movable. The machine can connect with computer as other
external device such as printer , scanner...
5.With the assist of the ROUTER 6040T, your design idea will be real-time display.
Engraving Machine Parameters:
X,Y,Z Working Area : 600(Y)*390X*120(Z)mm
Outside dimension : 865*680*570mmL*W*H
Table size : 770Y*490Xmm
Lathe structure : 6061/6063 Aluminum alloy
Max. Feeding height : ≤100mm
Drive unit
X axis :1605 Ball Screws
Y axis :1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit
X axisHigh intensity Chromeplate shaft
Y axisHigh intensity Chromeplate shaft
Z axisHigh intensity Chromeplate shaft
Stepping motor57 two-phase 3A 150N.cm
Outside dimension : 865*680*570mmL*W*H
Table size : 770Y*490Xmm
Lathe structure : 6061/6063 Aluminum alloy
Max. Feeding height : ≤100mm
Drive unit
X axis :1605 Ball Screws
Y axis :1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit
X axisHigh intensity Chromeplate shaft
Y axisHigh intensity Chromeplate shaft
Z axisHigh intensity Chromeplate shaft
Stepping motor57 two-phase 3A 150N.cm
Spindle motor
1Water cooled spindle motor can work longer time than air cooled motor.
2Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
tips
1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V).
1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V).
3,Please don’t change the data setting of the VFD if you are not professional technicians,
or it might damage the spindle motor.
Control Box Parameters:
Operating Voltage:AC220V
Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection:USB port
Command code:G code
Protection:Emergency stop button
FEATURE:
1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
How to ues
1.Assembling and locating the machine on steady desk well.
2.Make sure that your computer has a USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to
check whether the water-cooling system working well.
7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
8.You can enjoy making you dream with using our machine now.
Highlights of water cooling system :
It can cool the spindle and protect the machine
Avoid the spindle burn out
Can engrave the high hardness or metal
It can improve the efficiency and accuracy of the machine.
It can cool the spindle and protect the machine
Avoid the spindle burn out
Can engrave the high hardness or metal
It can improve the efficiency and accuracy of the machine.
Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this 6040 engraving machine, you can contact us if you have any questions, and we will answer you in time. I wish you all the best.
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
