HDfury module will transform any “technically able” ANALOG display into a DIGITAL display performing a perfect visual HD&Full HD fury @ 720p/1080p from any HDMI/HDCP sources such as PS3, X360 Elite, HD-DVD&Blu-Ray player, SAT&Cable HDTV setbox, HDMI graphic card, and more.
DVI/HDMI(HDCP) input/convertor module for RGB display (so-called “HDfury 1080prgb”).
HDfury can be listed as HDMI to RGB converter or HDMI to VGA converter
DVI-D 24p Female Port Input (100% digital).
A HDMI -> DVI-D cable can be use to connect to an HDMI source.
RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
Compatible with non-HDCP or HDCP sources.
Compatible with any RGB Display
Directly connect to VGA input.
Easy to install within a minute. (Plug&Play)
10 bits 175MHz triple video DAC – Inter-DAC : 2%
RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
DVI video bandwidth in VGA/RVB outputs: 25-165MHz
DVI Data Rate – Bandwidth 1.65 Gbps (Single link)
Maximum resolutions: 1920×1080 or UWXGA (1920×1200) at 60Hz with custom porch settings or SXGA (1280×1024) at 85Hz Computer compatible (PC, Mac)
HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
DVI1.0 compliant / HDMI interoperable and HDCP ready
HD-DVD and Blue Ray Disc players compatible
Playstation3 and X360 Elite compatible
SAT and CABLE setbox for HDTV channels compatible
HDCP compatible with embedded keys loaded.
Energy management : DVI et VESA DPMS compatible.
Ultra low power consumption in Standby (3,5mA)
Maximum power : 0.4A under 5V (at 165MHz pixel clock)
On-board DC/DC converter (5V) with extra-low EMI signature
Power +5V from DVI/HDMI or external power supply
Blue LED to display active digital link.
Safe cost solution – Single IC solution + external eeprom
Small size : 75×56mm black cabinet
Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA SUB-D plugs stand).
Shortest RGB analog video link as possible
HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes “a part of the display itself”.
Professional factory made (mass-production) using pick/place and reflow/wave solder pro. equipment.
Gold Plated connectors, tracks and material
HDfury has a +5v input
EDID detective feature: EDID eprom can be reprogrammed by your computer through it’s Graphic Card! (This feature is reserved to professionals)
Enhance your display compatibility (lifetime) and value (now compatible with new equipment)
HDfury maximum output limit is above the 1080p resolution which makes this device absolutely hassle free to handle 1080p video data flow continuously during years !
HDfury HDMI/DVI-D to VGA signal converter delivers clean video at the highest resolution up to 1920×1080P.
It’s an in-line adapter easy to install, connect to any VGA display and run a HDMI/DVI cable to your source.
The DDA delivers native resolution video with the internal 1.65Gbps bandwidth, ideal for both PC and AV sources.
Home Cinema Addicts:
- HDfury is also compatible with the 3 Tubes projectors from Barco such as BD701, BG701, Ciné 7, BG800(s), BG801, BD808(s), BG808(s), BG1208(s)(/2), BG1209(s)(/2), Cine 8 (Onyx), Zenith Pro 1200, Cine 9, Cinemax.
It can be hooked on Port 3 (With a VGA female cable -> SUBD9P) or Port 5 (with a VGA female -> 5xBNC cable)
- HDfury is compatible with the 3 tubes projectors from NEC (All models) with a VGA female -> 5xBNC cable
- HDfury is compatible with the “Matrix” Projector (not HDCP) such as LCD, DLP, SXRD, D-ILA through VGA 15pins