Cole Clark MISTRESS Translucent Blue
This is a solid electric guitar by Cole Clark, an Australian brand that has become well-known for its acoustic guitars in recent years.
Like acoustic guitars, wood native to Australia is used, and the body back is bunya or Queensland maple, and the body top is likely to be either US rock maple, Queensland maple, blackwood, figured Australian ash, or bunya. cannot be determined.
The neck is either US rock maple, Queensland maple, blackwood, or Bunya, but judging from the wood grain, it seems that US rock maple or Queensland maple was used.
The head is joined to the neck using advanced woodworking techniques, and it is a set neck with the neck inserted deeply into the center of the body. When you open the body back plate, you can adjust the neck using the truss rod. The special truss rod is out of stock. I am.
The pickup is equipped with two original MISTRESSs and is screwed from the body back.
Controls are 2 volumes and 2 tones, with coil taps available by pushing and pulling each tone pot.
It is characterized by a clear, clear sound with a good start, and is reminiscent of the electric guitar sound of the 70s-80s.
Recommended for those who like rare guitars as it is rarely sold in Japan.
This has small scratch marks and dents scattered throughout, and there is a small paint chip on the 6th string side of the top of the body.
This has about 50 remaining due to fret rubbing, but there is no problem with playing at present.
All parts have been maintained and cleaned at our repair center, and playability is good.
Truss rod Tighten/Loosen there is some leeway.
Frets around 50% 60%
String height (bass string side) 2.0mm above the 12th fret
String height (treble string side) 15.0mm above the 12th fret
Nut width 43.7mm
Neck thickness around 1st fret
20.3mm
Neck thickness around 12th fret
25.0mm
Scale 648mm(25.5")
RADIUS 305mm(12")
Strings during setup ERNIEBALL2223 .009-.042set
Manufacture year unknown
Country of manufacture Australia
case soft case non-genuine
Includings None
Serial number 000197
Body weight 3.67kg
Repair Maintenance points Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Grinding Nut replacement
changes -
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Due to factors such as humidity and temperature during the in-store display period or during product transportation, the values may not be the same as when delivered.
Manufacture year unknown
Serial number 000197
Like acoustic guitars, wood native to Australia is used, and the body back is bunya or Queensland maple, and the body top is likely to be either US rock maple, Queensland maple, blackwood, figured Australian ash, or bunya. cannot be determined.
The neck is either US rock maple, Queensland maple, blackwood, or Bunya, but judging from the wood grain, it seems that US rock maple or Queensland maple was used.
The head is joined to the neck using advanced woodworking techniques, and it is a set neck with the neck inserted deeply into the center of the body. When you open the body back plate, you can adjust the neck using the truss rod. The special truss rod is out of stock. I am.
The pickup is equipped with two original MISTRESSs and is screwed from the body back.
Controls are 2 volumes and 2 tones, with coil taps available by pushing and pulling each tone pot.
It is characterized by a clear, clear sound with a good start, and is reminiscent of the electric guitar sound of the 70s-80s.
Recommended for those who like rare guitars as it is rarely sold in Japan.
This has small scratch marks and dents scattered throughout, and there is a small paint chip on the 6th string side of the top of the body.
This has about 50 remaining due to fret rubbing, but there is no problem with playing at present.
All parts have been maintained and cleaned at our repair center, and playability is good.
Truss rod Tighten/Loosen there is some leeway.
Frets around 50% 60%
String height (bass string side) 2.0mm above the 12th fret
String height (treble string side) 15.0mm above the 12th fret
Nut width 43.7mm
Neck thickness around 1st fret
20.3mm
Neck thickness around 12th fret
25.0mm
Scale 648mm(25.5")
RADIUS 305mm(12")
Strings during setup ERNIEBALL2223 .009-.042set
Manufacture year unknown
Country of manufacture Australia
case soft case non-genuine
Includings None
Serial number 000197
Body weight 3.67kg
Repair Maintenance points Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Grinding Nut replacement
changes -
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Due to factors such as humidity and temperature during the in-store display period or during product transportation, the values may not be the same as when delivered.
Manufacture year unknown
Serial number 000197