Handheld True RMS Digital Clamp Meter Multimeter AC Volt Amp Ohm Cap Tester
Product Features:
1.Accurately Measures: AC/DC voltage, only for AC current (not for DC current),
resistance, and also provides diode and continuity tests
2.Jaw Opening: The Clamp measures the AC current in a
conductor up to 26mm without interrupting the circuit.
3.Additional Features: Data hold, max reading, and an easy-to-read large LCD.
4.Sleep Mode: Automatically enters sleep mode after
15 minutes of inactivity for energy conservation.
5.Easily Carrying: Comes with a handy carrying pouch, perfect for use while you're on the go.
6.Technical Conditions: 23℃±5℃ relative humidity less than 80% RH
7.Replace the Battery: If the battery "+-" sign appears on the display screen,
the battery should be replaced.
8.Remove the screw and open the back cover and replace
the used battery with a new one (AAA, 1.5v * 2, or equivalent).
9.Automatic Shutdown:
A. If you do not operate the meter for about 15 minutes, it will turn off automatically.
To turn it on again, simply rotate the range switch or press the button.
B. If the "hold" button is pressed to wake up the meter after the meter is
automatically turned off, the automatic shutdown function will be disabled.
Product Specifications:
Type:Digital Clamp Table
Color:Blue / red
Battery:AAA x 2(Included)
Material:ABS
Display:LCD, updated 2000 times every 2 seconds
Polarity Indication:"-" automatic display
Over Range Indication:Display "OL"
Indication of Low Battery:Display "electrode"
Range Selection:automatic
Measuring Voltage Range:600 (V)
Measuring Current Range:2-400 (A)
Measuring the Resistance Range:200-200 k - 2 m (Ω)
Operating Temperature:0℃ to 40℃, less than 80% RH
Storage Temperature:-10℃ to 50℃, relative humidity less than 85%
Battery Type:1.5v * 2, AAA size
Package Includes:
1 X Multimeter
4x Test Leads
1 X Instruction Manual