Ideal condition!
Model: TC-120 diving metal detector
Working method: pulse induction
Operating frequency: 3.2kHz
Tuning: Auto or manual (retuning)
Indicated: Audio / vibration / LED
Temperature range: 5° to 158°F (-15° to + 70°C)
Coil: 4.2 in
Net weight: 280 g / 10.5 oz. (Battery is
NOT included)
Dimensions: 34.6x9.3x 11.5 cm
Battery: 9V (6F22). Alkaline or rechargeable batteries (Battery is NOT included)
Battery power: generally 20 hours
Instructions -
Press and hold the on / off button for 3 seconds and the device will be powered off.
Change Settings
1. After turning on the equipment, the default is (sensitivity of buzzer and vibrator)
2. To adjust mode, press the button (O) for 2 seconds. The device will make 2 beep sounds, and the LED start flashing. Then keep pressing the button • within 1 second and change settings:
Sound vibration: low to medium to high
Voice: low, medium and high
Vibration: low, medium and high
After setting, the LED will flash five seconds, then the device will automatically confirm the current setting status.
reset-
When the soil mineralization is serious, or improper operation may leads continuous error signal. Please quickly press and release the button O, LED flashing once, the equipment will eliminate the false alarm.
The system will quickly reset the detection balance, and back to normal working state.