DeArmond Starfire Featureial Cherry
The DeArmondbyGuild brand was derived around 2000 during the reorganization of the Fender Group.
Based on the popular Guild Starfire with a thin body of approximately 16 inches, it is equipped with two USA-made DeArmond2K single coil PUs.
It is equipped with a Bigsby and control knob with the rare D logo.
After we received the item, we have cleaned it, replaced the strings, adjusted the rod, adjusted the octave, adjusted the string height, and repaired the electrical equipment (toggle switch replacement), so it is in good playing condition.
This has some small scratch marks and dullness on parts, but there are no obtrusive scratch marks and it is in good condition.
truss rod
There is plenty of room
fret
60 70
accessories
Gig bag non-genuine
Country of origin
KOREA
weight
4.33kg
serial
KC9024432
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above the 12th fret
Nut width | 42.5mm
Neck thickness around 1st fret |21.6mm
Neck thickness around 12th fret |-
Scale|628mm(24.75")
RADIUS|305mm(12")
Strings during setup | ERNIEBALL2221 .010-.046set
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Electrical repair
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year unknown
Body weight 4.35kg
Serial number KC9024432
Includings, gig bag non-genuine
Based on the popular Guild Starfire with a thin body of approximately 16 inches, it is equipped with two USA-made DeArmond2K single coil PUs.
It is equipped with a Bigsby and control knob with the rare D logo.
After we received the item, we have cleaned it, replaced the strings, adjusted the rod, adjusted the octave, adjusted the string height, and repaired the electrical equipment (toggle switch replacement), so it is in good playing condition.
This has some small scratch marks and dullness on parts, but there are no obtrusive scratch marks and it is in good condition.
truss rod
There is plenty of room
fret
60 70
accessories
Gig bag non-genuine
Country of origin
KOREA
weight
4.33kg
serial
KC9024432
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above the 12th fret
Nut width | 42.5mm
Neck thickness around 1st fret |21.6mm
Neck thickness around 12th fret |-
Scale|628mm(24.75")
RADIUS|305mm(12")
Strings during setup | ERNIEBALL2221 .010-.046set
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Electrical repair
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year unknown
Body weight 4.35kg
Serial number KC9024432
Includings, gig bag non-genuine