Baufan potash water glass

baufan® potash water glass is a purely mineral binder for the production of coatings and impregnations. Ideal as a substrate
for all silicate colors.

Solidifies and impregnates sandy plasters
The substrate remains open to diffusion and solidifies without film formation
Weather and moisture resistant, for indoor and outdoor use

scope of application
baufan® potassium water glass is a ready-to-use, concentrated, water-dilutable solution of potassium silicate
and solidifies mineral substrates through silicification. Reduces and unifies the absorbency of the
underground. Excellent for surface renovation before subsequent wallpapering and painting work.

raw material base
Potassium silicate solution

processing
The surface must be clean, stable and free of grease.
Remove old, poorly adhering paint and loose plaster. Apply baufan® potash water glass with a brush or a suitable spray device (do not inhale spray mist when spraying). Depending on the absorbency of the surface, baufan® potash water glass is up to 1:3 with water
Can be diluted (use diluted solution immediately).
Clean tools with water immediately after use.
baufan® potash water glass cannot be used as a final coat. If used on mineral substrates, subsequent revision must be carried out
by plastering or painting over.
Protect surfaces not to be treated from splashes.

consumption
depending on the surface ► from 100 - 200 ml/sqm

Processing temperature
at least + 5 °C for material and circulating air

storage
Store the container tightly closed in a cool, but frost-free place. In the
unopened and stored properly
Best before: see batch label.

Delivery form:
1 PE bottle of 1 L

Safety notice:
Keep out of reach of children.
Always read the label and product information before use.

 

Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin irritation. 2 ; H315 - Skin corrosion/irritation : Category 2 ; Causes skin irritation.
Eye irritation. 2 ; H319 - Serious eye damage/irritation : Category 2 ; Causes serious eye irritation.
Marking elements
Labeling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms

Exclamation mark (GHS07)
Signal word
Danger
Danger warnings
H315 Causes skin irritation.
H319 Causes serious eye irritation.
safety instructions
P102 Keep out of reach of children.
P262 Do not get in eyes, on skin or on clothing.
P280 Wear protective gloves/eye protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Possibly
Remove contact lenses, if possible. Continue rinsing.
P101 If medical advice is required, have container or label at hand.
P501 Contents/container in accordance with local/regional/national waste disposal regulations
respectively.
Other dangers
This mixture does not knowingly contain any ingredients that are PBT/vPvB classified or in the SVHC candidate list
are included.


Payment via PayPal
Shipping by DHL
supremeauctiononlinesoftware.responsive.2016 supremeauctiononlinesoftware.redesigner

supremeauctiononlinesoftware.staticWidgets.templateBased
baufan® potash water glass is a purely mineral binder for the production of coatings and impregnations. Ideal as a substrate baufan® potassium water glass is a ready-to-use, concentrated, water-dilutable solution of potassium silicate Remove old, poorly adhering paint and loose plaster. Apply baufan® potash water glass with a brush or a suitable spray device (do not inhale spray mist when spraying). Depending on the absorbency of the surface, baufan® potash water glass is up to 1:3 with water baufan® potash water glass cannot be used as a final coat. If used on mineral substrates, subsequent revision must be carried out Eye irritation. 2 ; H319 - Serious eye damage/irritation : Category 2 ; Causes serious eye irritation. This mixture does not knowingly contain any ingredients that