2X(1212-2401 24V 70A Permanent Magnet DC Motor Controller for CURTIS2028
2X(24v 70A 1212-2401Curtis dc motor controller
The 1212 is designed for use in low power DME applications such as micro-scooters, mini-scooters, foldable scooters, and low-end personal mobility vehicles.
Although it is optimized for use on modern 3-wheel and 4-wheel mobility aid scooters, its programmable also allow it to be used on any low power permanent magnet motor application.
:
Nominal input voltage: 24 V
PWM operating frequency: 15.6 kHz
Electrical isolation to heatsink (min.): 500 V
Minimum motor resistance: 160 mΩ (45 amp models); 120 mΩ (70 amp and 90 amp models)
B+, B- logic pin current (max.): 9 A (pins 7 and 13 on 14-pin connector)
input current (typical): 80 mA
Logic input current (typical): 1 mA
Horn output current (max.): 15 mA
Lift lockout output current (max.): 50 mA [1212P only]
BDI output voltage, resistance (max.): 0-5 V, 10 kΩ
LED output current (max.): 15 mA
Electromagnetic brake coil resistance (min.): 32 Ω
Throttle type: resistance or voltage; single-ended, inverted single-ended, wigwag, inverted wigwag, or unipolar
Storage ambient temperature range: -40°C to 65°C (-40°F to 149°F)
Operating ambient temp. range: -25°C to 50°C (-13°F to 122°F)
Heatsink overtemperature: linear cutback starts at 80°C (176°F); complete cutoff at 105°C (221°F)
Heatsink undertemperature: cutback starts at -10°C (14°F) and is reduced linearly to 50% at -25° (-13°F)
Undervoltage cutoff: 14 V
Overvoltage cutoff: 34 V
Material: ABS
colour: black
Package Contents:
1 x Motor Controller)