Schomburg ASOCRET-M30
Water-repellent multi-mortar up to 30 mm

for indoor and outdoor use
shrinkage compensated
quick-setting
sulfate resistant
Layer thicknesses of 3–30 mm
very supple
high stability
can be revised quickly
Standard compliant according to din 18533

Areas of application:
ASOCRET-M30 is used for repairs and
Leveling of chippings and imperfections on wall and floor surfaces up to a layer thickness of 30 mm in one go
operation. Also suitable for the production of mineral sealing grooves that are impermeable to water
Plaster layers for negative seals or plaster applications in the base area from a layer thickness of 10 mm
as well as filling joints, e.g. filigree ceilings.
Furthermore, ASOCRET-M30 can be used for leveling pool walls and modeling
For example, pool heads or similar areas in swimming pools can be used.
Due to its reactive properties, critical applications, e.g. at high humidity, can be low
temperatures, etc., can be carried out safely and without long waiting times.

Technical data:
Base: sand, cement, high quality
Additives
Grain: < 1.0 mm
Color: light gray
Water requirement: approx. 4.50–5.25 l/25 kg approx. 1.10-1.30L/6kg
Water requirement, bonding bridge approx. 0.26 l/kg powder component
Raw density: approx. 1.6 kg/cdm
Substrate/processing temperature: +5°C to +30°C
Processing time*: approx. 30 min.
Can be reworked*: after approx. 3 hours
Bending tensile strength after 28 days: approx. 5.0 N/mm²
Compressive strength after 28 days: approx. 20.0 N/mm²
Water absorption coefficient w24: < 0.1 kg/m⊃2; × h0.5

Consumption:
Area equalization: approx. 1.4 kg/sqm/mm layer thickness
Sealing grooves: approx. 3.0kg/m
* The information refers to +23°C and 50% relative. Humidity. Due to property and weather conditions, the
extend or shorten the specified dates.

Delivery form:
1 bag of 6 kg

Safety notice:
Keep out of reach of children.
Always read the label and product information before use.

Leveling of chippings and imperfections on wall and floor surfaces up to a layer thickness of 30 mm in one go operation. Also suitable for the production of mineral sealing grooves that are impermeable to water Plaster layers for negative seals or plaster applications in the base area from a layer thickness of 10 mm Furthermore, ASOCRET-M30 can be used for leveling pool walls and modeling For example, pool heads or similar areas in swimming pools can be used. Due to its reactive properties, critical applications, e.g. at high humidity, can be low temperatures, etc., can be carried out safely and without long waiting times. Water requirement, bonding bridge approx. 0.26 l/kg powder component * The information refers to +23°C and 50% relative. Humidity. Due to property and we