We are a genuine UK seller with UK stock!

We can get this to you usually within 4 days as we post daily but if you need it quickly then please select the 1st class postage option at only £2 extra

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your classic two stroke Bridgestone BS90 88cc motorcycles.

For Mountaineer, Mountain, Deluxe, Trail versions produced between 1964 and 1968 with the 16mm thread on the fuel tank.

May fit other Bridgestone models too but please message us if you are not sure.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

Note that our tap has the fuel outlet on the right and the filter bowl on the BOTTOM as does the original.

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere! Note also that the filter bowl on these taps is made from metal and NOT plastic like some others!

Don't mess about trying to reseal your old original fuel tap. I've tried all that and it just doesn't last. They generally leak through the front or get so bunged up with crystallised petrol inside that they stop working altogether.

OK so this tap not original Bridgestone but it is a much cheaper alternative than trying to get an original one.

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes plus other classic blue smokers that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with our supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

This will be a direct fit on your bike if you have a 16mm thread on your fuel tank.

Connection to fuel line: 6mm internal diameter pipe.

Taps are obviously supplied with a seal too.

We also sell very good quality heavy wall green tinted petrol pipe to suit this tap. Check out our other listings.

Our taps do have a filter bowl on the bottom but we would recommend that you also fit an inline filter too.

Please compare yours with our pictures before purchase.

Dispatched with free 2nd Class parcel postage unless you require faster 1st class delivery for an extra £2.

Please could you make your selection on purchase.

MadMopeds