Features:
APPLICATION: Works on most HEUI injectors; Fits for Ford 7.3L 1994-2003 Power Stroke, For HEUI injectors.
IDEAL REPLACEMENT: This fuel injector rebuild kit contains everything required to rebuild all 8 injectors for HEUI injectors. Kit includes washers (.002" / .004"), DPS0010 screws, IP15 Torx, T10 Torx, feeler gauge (.002" / .004"), Fuel Injector O-Ring Seal Kit, Vise Clamp and stainless Steel Back up Rings. Easy to fix ‘HARD TO START’ issue when cold without removing the injectors.
DIRECT REPLACEMENT: Replace for # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014.
FUNCTION: Kit includes stainless- steel washers & solenoid spacer shims. If the clearance between your armature plate and adapter plate is causing cold start issues, you can install the washers to increase the clearance back to .004" to .005" (like new injectors). Placed solenoid shims under all four corners of the solenoid (for a total of .005"), to increase the Solenoid to armature clearance to near factory specs, when solenoid is energized.
Specifications:
Product Name: Fuel Injector Rebuild Kit
Condition: Brand New
Warranty: 180 days
Fitment Type: Direct Replacement
Manufacture Part Number: DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 D, 1833564C92
Fitment:
For Ford 7.3L Power Stroke 1994-2003
Package included:
12pcs 0.004" thick Armature Washers, stainless steel
12pcs 0.002" thick Armature Washers, stainless steel
45pcs 0.002" thick Solenoid Washers, stainless steel
45pcs 0.003" thick Solenoid Washers, stainless steel
10pcs DPS0010 hardened screws with T10 Torx heads
1pc Special IP15 Torx to remove Solenoid Screws
1pc Special reverse TORX PLUS MAXX to remove stock armature security screws.
1pc T10 Torx to install the 10 new DPS0010 screw.
1pc Special tool to remove and reuse any striped-out solenoid screws.
2pcs 1/4" X 3" Magnetic bit holder to remove armature and solenoid screws in truck. Use it with 1/4" Box end wrench.
1 set 0.002" feeler gauge & .004" feeler gauge to check clearances
8 sets DPS008 wear resistant Teflon coated OEM proved quality EXTERNAL O-ring.
8 sets INTERNAL O-ring seal kit with 8 poppet springs and 8 nozzle springs and 20 check balls (2 check balls Req. for each injector) to internally rebuild eight (8) INJECTORS after you have removed them from the engine.
1 set Aluminum Vice Clamp & Bracket to convert your injector hold down Bracket to a tool to unscrew the injector body with your breaker bar or ratchet to rebuild the internal parts.
8pcs New Heavey Duty Spiral Solid stainless Steel Back up Rings to Replace Standard Slit Steel Backup Rings That Come In The O-ring Kit To Prevent upper O-ring failure.
1pc Wool dauber helps add oil to the brass cup before installing your injectors.
Note:
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
APPLICATION: Works on most HEUI injectors; Fits for Ford 7.3L 1994-2003 Power Stroke, For HEUI injectors.
IDEAL REPLACEMENT: This fuel injector rebuild kit contains everything required to rebuild all 8 injectors for HEUI injectors. Kit includes washers (.002" / .004"), DPS0010 screws, IP15 Torx, T10 Torx, feeler gauge (.002" / .004"), Fuel Injector O-Ring Seal Kit, Vise Clamp and stainless Steel Back up Rings. Easy to fix ‘HARD TO START’ issue when cold without removing the injectors.
DIRECT REPLACEMENT: Replace for # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014.
FUNCTION: Kit includes stainless- steel washers & solenoid spacer shims. If the clearance between your armature plate and adapter plate is causing cold start issues, you can install the washers to increase the clearance back to .004" to .005" (like new injectors). Placed solenoid shims under all four corners of the solenoid (for a total of .005"), to increase the Solenoid to armature clearance to near factory specs, when solenoid is energized.
Specifications:
Product Name: Fuel Injector Rebuild Kit
Condition: Brand New
Warranty: 180 days
Fitment Type: Direct Replacement
Manufacture Part Number: DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 D, 1833564C92
Fitment:
For Ford 7.3L Power Stroke 1994-2003
Package included:
12pcs 0.004" thick Armature Washers, stainless steel
12pcs 0.002" thick Armature Washers, stainless steel
45pcs 0.002" thick Solenoid Washers, stainless steel
45pcs 0.003" thick Solenoid Washers, stainless steel
10pcs DPS0010 hardened screws with T10 Torx heads
1pc Special IP15 Torx to remove Solenoid Screws
1pc Special reverse TORX PLUS MAXX to remove stock armature security screws.
1pc T10 Torx to install the 10 new DPS0010 screw.
1pc Special tool to remove and reuse any striped-out solenoid screws.
2pcs 1/4" X 3" Magnetic bit holder to remove armature and solenoid screws in truck. Use it with 1/4" Box end wrench.
1 set 0.002" feeler gauge & .004" feeler gauge to check clearances
8 sets DPS008 wear resistant Teflon coated OEM proved quality EXTERNAL O-ring.
8 sets INTERNAL O-ring seal kit with 8 poppet springs and 8 nozzle springs and 20 check balls (2 check balls Req. for each injector) to internally rebuild eight (8) INJECTORS after you have removed them from the engine.
1 set Aluminum Vice Clamp & Bracket to convert your injector hold down Bracket to a tool to unscrew the injector body with your breaker bar or ratchet to rebuild the internal parts.
8pcs New Heavey Duty Spiral Solid stainless Steel Back up Rings to Replace Standard Slit Steel Backup Rings That Come In The O-ring Kit To Prevent upper O-ring failure.
1pc Wool dauber helps add oil to the brass cup before installing your injectors.
Note:
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
