PEAVEY Sanctuary Series S-4   4Channel Rack AutoMixer 

100 DAY WARRANTY

The Peavey Sanctuary Series S-4 is the most compact, most affordable mixer in the Sanctuary Series. It's perfect for applications where only a few mics or some line inputs are required Naturally, the S-4 includes 48-volt phantom power for use with highly sensitive cardioid condenser mics. But there's more: Of course, the best part of the Sanctuary Series is that the majority of the functions are under auto control, meaning you get superb sound quality without requiring a sound tech with a degree in audio engineering. Now that's what we call "User Friendly!"

Four Automix channels with compression built-in 
Okay, Automix sounds impressive, but does it really work? You bet! The Peavey S-4 has (no surprise) four fully-automated channels onboard. That means the unit will take care of things like switching from different microphones automatically and turning down the volume of all channels not currently in use. Automix not only simplifies the mixing of spoken word microphones, but also improves sound quality and increases available microphone gain for soft-spoken individuals thanks to a special "soft-knee" compression circuit. This helps keep things from getting too loud or so soft nobody can hear a word. End result? Crystal-clear audio with no extraneous noise
Another feature unique to the S-4 is Mid Morph equalization, which is equivalent to two EQ controls in one. When the knob is cut, it pulls out low-mid frequencies that add muddiness to the sound; when boosted, it shifts to an upper-mid frequency that brightens the vocal range. Every channel on the mixer includes Mid Morph EQ as well as normal low and high EQ

Inputs

Mic 4 x XLR

Impedance: Balanced 2.2 kΩ

Connector: Pin 1 (ground), pin 2 (+), pin 3 (-)


Input Level:

At maximum gain (68 dB)

Minimum-64 dBu, nominal -56 dBu, maximum -48 dBu

At minimum gain (2 dB)

Minimum +2dBu, nominal +10dBu, maximum +22dBu

Line 4 x 1/4" phone

Impedance: Balanced 10 kΩ

1/4" TRS Connector: Tip(+), ring (-), sleeve (ground)


Input Level:

At maximum gain (48 dB)

Minimum -44 dBu, nominal -36 dBu, maximum -28 dBu

At minimum gain (-18 dB)

Minimum +22dBu, nominal +28dBu, maximum >30dBu


Outputs

Main Output

Impedance: 600 Ω (load, minimum)

1/4" Phone: Output Level (Balanced): Nominal (+4 dBu), maximum (+22 dBu)

XLR: Maximum (+22 dBu)

Connector: Pin 1 (ground), pin 2 (+), pin 3 (-)

Insert

Direct/Insert: 4 x 1/4" phone

1/4" Phone: Output Level (Balanced): Nominal (+4 dBu), maximum (+22 dBu)


Headphone

1 x 1/4"phone

Impedance: 8 Ω (load, minimum)

1/4" Phone: Output Level (Balanced): Maximum: 135 mW (32 Ω)

Connector: Tip(left), ring (right), sleeve (ground)


Hum & Noise

All Level Controls Down: -101 dBu residual noise, 105 dBSNR (reference +4 dBu)

Master Level Maximum, ChannelMix Levels at Minimum,All Channels Muted: -88dBu residual noise, 92 dBSNR (reference +4 dBu)

All Level Controls Maximum with Input Gain at Minimum: -88 dBu residual noise, 92 dBSNR (reference +4 dBu)

Gain

Mic Input Gain Adjustment Range: 2 to 68 dB

Mic Input to Main Output: 68 dB (maximum)

Line Input Gain Adjustment Range: -18 to 48 dB

Line Input to Main Output: 48 dB (maximum)


Frequency Response

Mic Input to Main Output (with 75 Hz Low Cut Filter): 75Hz (-3 dB) to 55 kHz (-1 dB)

Total Harmonic Distortion (THD)

Mic (20 Hz to 20 kHz) to Main Output (22 Hz to 22 KHz BW): 0.05%

Equivalent Input Noise

-129.8 dBu (input terminated with 150 Ω, maximum gain)


Crosstalk

Adjacent Input Channels (20 Hz to 20 kHz): 80 dB

Common Mode Rejection Ratio

Mic Input:

60 dB minimum (20 Hz to 20 kHz)

70 dB typical @ 1 kHz


Phantom Power

+48 V (all channels)

Equalizer Control Bands

1 x Mid Morph EQ


Meters

7-position LED, peak reading; (0 dB= +4 dBu)


Physical Indicators

Signal / Overload: Lights up at 2 dB below clipping

Rack Mountable Yes, 1 rack space

Power Requirements

17 W; 240 VAC, 60 Hz

Dimensions

19.00 x 8.12 x 1.75" (48.26 x 20.62 x 4.44 cm)

Weight

9.0 lb (4.1 kg)

Excellent condition. Fully working with 3Mths Return to base warranty for your peace of mind. Will come with UK
Power lead


TERMS & CONDITIONS 

We are Green IT Disposal Ltd, based in Altrincham in the North West of England. 

We provide asset management services for end-of-life or Excess inventory  Equipment to corporate and public sector clients. The assets we process are offered for sale after they have been electrically checked, physically inspected, data wiped and refurbished where necessary. Everything we sell is offered as working with warranty unless stated otherwise. We despatch within one working day of receipt of funds and customers can also collect from us. You can speak directly with our sales staff about this product or any other requirements you have. 

With over 12,000 items in stock at any time you will find what you need by calling our number. 

 RETURNS AND SUPPORT

Returns are dealt with honestly and fairly. On the very rare occasion that somebody has an issue with an item we simply ask them to send us an eBay message or call us to resolve during office hours. This is much quicker for both parties than going through eBay dispute processes, so please allow us to assist in the first instance. We will deal with queries quickly and be as flexible as we can to get you sorted out.

Feedback is important as it allows other buyers to see not only how good and accurate our descriptions, despatch and packaging are, but also how good we are as a seller in dealing with queries after the sale so please leave feedback only after you have contacted us and had your query resolved.

 Call Green IT Disposal -  Free Green and Easy IT Disposals !!!