Vendo questa scheda PCB che realizza da I2S a uscita analogica stereo differenziale utilizzando trasformatori di linea che separano completamente l'uscita dalla sezione digitale.

Una manciata di porte TTL ed una rete di resistenze R2R ladder per avere l'uscita analogica che pilota i trasformatori. 

L'interfaccia è totalmente in hardware logico.

Lavora in modalità non oversampling e accetta frequenze di clock oltre il classico 44.1 Khz fino a 192 Khz.

La linearità è garantita dalle resistenze utilizzate con tolleranza di 0.1%.

Vengono convertiti fino a 24 bit. A 16 bit gli ultimi 8 sono a zero, non lavorano e sono ininfluenti.

Praticamente sono quattro DAC R2R bufferizzati che lavorano a coppie in parallelo e pilotano direttamente il trasformatore senza l'uso di altri componenti.

I due canali Sx e Dx sono perfettamente sincronizzati come anche le uscite + e - del segnale analogico. Il trasformatore utilizzato ha, oltre alla bilanciata, anche una uscita singola.

E' previsto anche un ponticello per un interruttore di LIFT per connettere il trasformatore alla GND di alimentazione o alla terra.

Alimentazione 5V DC unica per tutta la sezione digitale.

Ovviamente essendoci solo il trasformatore, per la sezione analogica non serve alimentazione.

In foto vedete la PCB completa in funzione.

Ottima per costruire il convertitore veramente definitivo senza contatto con la parte digitale, suono puro analogico generato dal trasformatore.


ATTENZIONE:

Si vende esclusivamente la scheda della prima foto. SENZA I TRASFORMATORI.

Eventualmente siate interessati alla scheda con i trasformatori montati contattatemi prima in privato.

Io ho previsto i trasformatori della MONACOR LTR110 che sono ampiamente usati dei dispositivi professionali, hanno un ottima linearità e un ottimo rapporto qualità prezzo ma nulla vieta di utilizzare altri trasformatori da 600:600 ohm a piacimento.

Tutto il resto è mostrato a dimostrazione della funzionalità della scheda ed è escluso.

Essendo un dispositivo OEM è destinato a tecnici esperti.

Essendo una compravendita fra privato è esclusa qualsiasi garanzia.



------------------------------------------- ENGLISH ------------------------------------------------


I am selling this PCB board that achieves I2S to differential stereo analog output using line transformers that completely separate the output from the digital section.
A handful of TTL ports and a network of R2R ladder resistors to have the analog output that drives the transformers.
The interface is totally in logical hardware.
It works in non-oversampling mode and accepts clock frequencies beyond the classic 44.1 Khz up to 192 Khz.
Linearity is guaranteed by the resistors used with a tolerance of 0.1%.
Up to 24 bits are converted. At 16 bits the last 8 are zero, they do not work and are irrelevant.
Practically they are four buffered R2R DACs that work in pairs in parallel and directly drive the transformer without the use of other components.
The two left and right channels are perfectly synchronized as are the + and - outputs of the analogue signal. 
The transformer used has, in addition to the balanced one, also a single output.
A jumper is also provided for a LIFT switch to connect the transformer to the power supply GND or to earth pole.
Single 5V DC power supply for the entire digital section.
Obviously, since there is only the transformer, no power is needed for the analogue section.
In the photo you see the complete PCB in operation.

Excellent for building the truly definitive converter with no contact with the digital part, pure analog sound generated by the transformer.

ATTENTION:

Only the card in the first photo is sold. WITHOUT THE TRANSFORMERS.
If you are interested in the board with the transformers mounted, contact me privately first.
I have foreseen the MONACOR LTR110 transformers which are widely used in professional devices, they have excellent linearity and an excellent quality/price ratio but nothing prevents you from using other 600:600 ohm transformers as desired.
Everything else is shown to demonstrate the functionality of the card and is excluded.
Being an OEM device, it is intended for expert technicians.
Since it is a sale between a private individual, any guarantee is excluded.

FOR SHIPPING COSTS PLEASE ASK BEFORE BID.