Details

Description:
This Magnetic Induction Heater is a key piece of equipment used in all forms of induction heating. It is a hand-held one with slip-resist ergonomic housing. Besides, it is faster and safer than the traditional torch. Collateral damages normally associated with torches can also be eliminated. A bright LED light exists at the end to light up your work load.
 
Specification:
Plug: US plug
Input Voltage (V):110 V
Rated Output Power (W):1100 W
Rated Current Consumption (A):6.3 A
Time request heating up to 800 C:5-40 Sec depends on the work piece
Coil Output Voltage/Current:18V/50A
Main Application: Automotive Flameless Heating
Heating Type: Induction Heating
Accessaries: 6 Coils + 2 Wires + Carry Case
 
Induction heater application for:
1. Preheat become attached or rusted fasteners and parts that need to be separate
2. Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening.
3. Burning silent blocks, pressed on beams running gear or other machinery and equipment.
4. Heat treatment of metal parts, hardening, tempering, normalizing.
5. Pressing bearings on a hot landing, as well as flowability.
6. Snyatie small laminated glass sealants for metal.
7. Removing glued on painted metal spoilers, moldings, stickers.
8. The heating of the surface of the hood or other surfaces to be coated vinyl.
9. Removing rust from metal and car body by high-speed heating parts, and flaking rust.
10. Removing paint coating to a metal surface or body cars.
 
The accessories come with Induction heater:8Coils
 
Dia 30mm Coil:2 pieces
Dia 40mm Coil:2 pieces
Dia 50mm Coil:2 pieces
Length 750mm cable for DIY coil:2 pieces
 
Cleaning:
1. Make sure the unit is off and unplugged;
2. Use a dry, clean, non-abrasive cloth or paper towel to remove grease, oil and any dirt from the inverter tool and electrical cord;
3. Return them to the storage case.
 
Cautions:
▼ Read and understand all safety warnings and cautions in this manual before operating the apparatus.
▼ Keep your work area clean and well illuminated.
▼ Do not overreach, keep proper footing and balance at all times, proper footing and balance enable better control.
▼ Do not use it at moist surroundings or immerse it in water.
 
Package Includes:
1 x Magnetic Induction Heater
8 x Coils
2 x Spare lines
1 x Manual
1 x Tool Box

 

This is the description of Payment Method. 

 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2018 datacaciques

Description:
 
The collar is triggered by dog barking, a sound sensor bulit in the collar ,features are triggered while the sound sensor receive barking.
The bark collars are a perfect fit for small, medium and large dogs. Easily fits dogs around 8-120lbs with neck sizes 6-25 Inches.
Comes with a built-in USB rechargeable battery which can be fully charged in 2-3 hours and lasts longer than 10 days of use. Waterproof rating is IP67.
 
 
Turn On/Off the collar:
 
1, Long press M to turn on the device, hearing a bi~sound.
2, Long press M again to turn Off, hearing Bi~bi~sound.
3, Turn the device on, one - digit display on the screen, it's battery level.
 
 
Battery Indicator:
 
1, Press M to view battery level
2, When out of the battery, the collar will automatically shut down after the prompt flashes for 30 seconds Charging.
 
 
Battery Charging:
 
At 2 level battery indicator, please begin charging. It's recommended to turn OFF the collar after each use, this can greatly extend the standby time.
 
 
Setting Operation:
 
1, Long press M to turn the device on, dispaly the battery level.
2, Short press M to switch functions; Press ▲ to adjust the level.
① Bark sensor (1~7S, 7 is most sensitive)
② Vibration (0~8, 8 is highest vibration. 0 is off)
③ Shock (0~8, 8 is highest shock, 0 is off)
④ Battery (1~4 indicator)
 
 
Package included:
 
1 * Bark Training Collar
2 * Long Silicone
2 * Short Silicone
1 * Test Light
1 * USB Cable
1 * User Manual
 
Order will be shipped within 1 business day after payment confirmed.
 
We will ship according to your PayPal address. Please make sure it’s correct and include phone number for delivery.
 
If you have not received your product for a long time,please contact us,We will track the shipment and get back to you as soon as possible with a reply.
 
Our goal is customer satisfaction! Please DO NOT leave any negative feedback or open any case before communication!
We accept PayPal payment only.
 
Please contact us first if you need to use another method to pay.
 
Payment should be made within 3 days after bidding ends.
 
Otherwise a Unpaid Item case will be opened to you.
 
We are not responsible for buyers' local taxes.
 
Please include your special requests in eBay note if there is any.

We offer 14 days return policy. Please contact us within 14 days from the date you receive your order if you have any issues with the product and would like to return.

All returned items MUST BE in the original packaging.

We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, After both Buyer and Seller cancel the transaction from eBay or you may choose to have a replacement.

Buyer is responsible for return shipping cost.

 


On May 24, 2024 at 06:54:34 PDT, seller added the following information:

 

DataCaciques