Special Offer!
| KDM 450W is guaranteed to replace FSP SPARKLE SPI-250G,SPI-250G-B, SPI-300G-B. Larger wattage gives you more stable system, cleaner power, and more upgrade possibility. This is a brand new Energy-Efficient power supply. We do not sell used, refurbished or pulled power supplies. * High efficiency * Low Ripple & Noise * Output over voltage protection * Short circuit protection on all outputs * Reset table power shut down * Approved by UL, CB & CE * 6Pin P8 + 6pin P9 AT Connector * FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operatio * 100% burn-in under high ambient temperature (50¢J) * Vacuum-impregnated transformer * 100% Hi-pot tested * Dimension: 5.75"(W) x 3.25"(H) x 5.5"(D) Power Description: Output Power 450W Input Voltage 115V / 230V AC Frequency 60/ 50 Hz Output Voltage +5V -5V +12V -12V MAX(A) 36A 0.5A 22A 0.5A MIN(A) 0.5A 0.5A 0.5A 0.5A Technical Information: Fan Rear Fan MTBF 100000 Hours at 25°C Connectors 6+6pin AT P8/P9 | 4pin AT Push Button| 4pin Molex X 4 | 4pin FDD X 2 This power supply is compatible with many old model system, Accounting system, Automatic control machine, storage PCs for power supply replacement. |
|
|
SPECIFICATION |
Output Power |
450 Watt |
Input Voltage |
88 -264 Volts Ac |
Frequency |
60 / 50 Hz |
|
|
Temperature Range |
Operating: 0°C ~ +50°C on Full Load; Storage & Shipping: -20°C ~ +80°C |
Humidity |
5 ~ 90% on Operating, 5 ~ 95% on Storage |
Dielectric Withstand |
Primary Frame Ground 1800V AC for 1 Second |
MTBF |
100,000 Hours on Maximum Load at +25°C |
Rise time |
Less than 20ms |
Hold-up Time |
17ms Minimum at Nominal Input Voltage |
|
|
Output |
|
Voltage |
+5V |
-5V |
+12V |
-12V |
|
|
Current |
36A |
0.5A |
22A |
0.5A |
|
| | | | |
|
|
|
Place your order Now!!!
|
Thank You!
| |