BRAND NEW AND UNUSED 2” Tube (50.8mm OD) Cold Drawn Seamless Steel 90 Degree Bend

MATERIAL – Cold Drawn Seamless Steel – Specification - EN 10305-1 (Previously BS6323 Part 4, CFS3 BK, BS980 CDS2)

OUTSIDE DIAMETER – 50.8mm

WALL THICKNESS – 2.03mm

CENTRELINE RADIUS (CLR) – 165.1mm

 

BEND ANGLE – 90 Degrees

 

STRAIGHT LEG LENGTH – 100mm minimum

 

BENDING TECHNIQUE – Rotary Draw Bent

3.25D CLR Bend

This Bend is produced to the MSUK Blue Book.

If you need this bend with custom leg lengths  or multiple bends in a single length then please contact me as all bends are made to order. I will be more than happy to give you a price.

 

1.4.1. Specifications of the tubes used:

Minimum Material

Cold Drawn Seamless Unalloyed Carbon Steel, containing a maximum of 0.3% of carbon.

Note: For an unalloyed carbon steel the maximum content of additives is 1.7% for manganese and 0.6% for other elements.

Minimum Yield Strength

350 N/mm2

Minimum Dimensions (Ø in mm)

a) Mandatory tubular members 44.5 x 2.5 or 50.8 x 2

38 x 2.5 or 40 x 2.0 (For roll cages/bars approved prior to 1.1.95).

b) Optional tubular members

38.1 x 2.5 or 40 x 2.0

1.4.2. In selecting the steel, attention must be paid to obtaining good elongation properties and adequate weldability.

1.4.3. The tubing must be bent by a cold working process and the centreline bend radius must be at least three times the tube diameter. If the tubing is ovalised during bending, the ratio of minor to major diameter must be 0.9 or greater.

 

SUITABLE FOR MAKING YOUR OWN ROLL CAGE, ROLL BAR, GO KART, HANDRAILS OR ANY GENERAL ENGINEERING USE

ALL BENDS ARE MADE FROM BRAND NEW, UK BOUGHT MILD STEEL

All bends are produced on a market-leading and numerically controlled Baileigh Industrial rotary draw bender, which is accurate to +/- 0.1 of a degree. The dies used to manipulate the tube are fully machined, from a single billet of A36 low carbon steel or 1018 mild/low carbon steel depending on the CLR. The counter die uses a 954-C aluminium bronze head with a UHMW plastic slide. Using fully-machined dies as opposed to a cast die means that the quality of the bend is better, due to cast dies leaving an imprint on the inside of the tube rather than an as-drawn surface finish. Baileigh Industrial is the only company on the market to supply fully machined tooling, which is why we’re proud to use their products.

 

If you have ANY QUESTIONS then PLEASE message us via eBay before buying. We will be more than happy to answer them!

Please feel free to send any bespoke drawings through to us – we are very experienced in creating custom projects/applications. We can then put up a new item on eBay with an agreed price for that particular job so that you can continue buying in a safe environment.

 

PRICE GUARANTEE

 

Tube Bender Limited will not be beaten on price, whether it’s for one, 10, 100 or 1,000 parts! If you can email us over a quote you have received or a link to a price you have seen – we can guarantee to beat it by at least 10%!