Description:
New Hejnar Photo Quick Release 6.50 inch rail and 2.375 inch clamp ( model F62). Something similar to rail with integrated clamp after assembled. Works very nice as nodal slide for panorama ptotography. I do provide 2 dowel pins with rail. They prevent clamp from twisting. Clamp itself is 1.5 inch, with dual mounting and captive style knob. Clamp can be oriented in 3 different direction when mounted onto rail. Clamp can be also mounted on rail end and use to hold lens support bracket. Hard coat black anodized surface. If you want clamp go higher just use 1/4 or 3/8 spacer block and you are there ( spacer block sold separately)
It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps. International standard dove-tail rail, compatible with Arca-Swiss type quick release clamps and rails.
Clamp Specification:
- 2.375 inch long
- Socket is countersunk on top for 1/4-20 or M6 screw but also threaded 3⁄8”-16.
- Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
- Made from 6061-T6 Aluminum.
- Black hard coat anodized .
- Made in USA
Rail Specification
- 6.5 inch long
- 1.5 inch wide
- 5/8 inch thick
- Weight 5.7oz (161g)
- One captive style slot.
- Bubble level build in
- One 1/4-20 taped hole on top surface and one 1/4-20 taped hole on rail end
- Metric mm scale engraved in each side of rail
- Double-dovetail design allows for dual clamping surfaces on rail
- Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
- Made from 6061-T6 Aluminum.
- Made in USA
- Black Anodized.
- Used as nodal slide or lens support
Auction Includes:
- One 2.375 inch clamp
- One 1/4-20 x 3/4 clamp mounting screw.
- One 6.50 inch rail.
- One Captive style 1/4-20 screw
- Two M3 screws attached to the plate.
- Two 5mm Dowel pins
- Hex key for ¼-20 screw and M3 screw.