Product Description:
This is new Hejnar Photo Quick Release 8.00 inch rail with 2.375 inch clamp. Something similar to rail with integrated clamp after assembled. Great as nodal slide. I do provide 2 dowel pins with rail. It prevent clamp from twisting. Clamp itself is 2.375 inch with dual mounting and captive style knob. Clamp can be place on rail with knob facing back or side. It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps. International standard dove-tail rail, compatible with Arca-Swiss type quick release clamps
Compatible with:
Markins including level release clamp
Really Right Stuff, including level release plate.
Arca Swiss
Wimberley
Kirk
Photo Clam
Foba
Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)
Custom Brackets
Jobu Designs
Acratech
Other Arca swiss type products
Clamp Specification:
- 2.275 inch long
- Weight 3.6oz (103g)
- Clamp can be place on rail with knob facing back or side
- Socket is countersunk on top for 1/4-20 or M6 screw but also threaded 3⁄8”-16.
- Clamp includes two safety stop relief grooves. 2.6mm depth of it guarantee compatibility with most plates/rails.
- Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops
- Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
- Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside.
- Made from 6061-T6 Aluminum.
- Black hard coat anodized clamp and clear anodized knob.
- Made in USA
Rail Specification
- 8.00 inch long
- 1.5 inch wide
- 1/2 inch thick
- Weight 4.3oz (123g)
- One captive style slot.
- One 1/4-20 taped hole.
- Metric mm scale engraved.
- Bubble level
- Double-dovetail design allows for dual clamping surfaces on rail
- Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
- Made from 6061-T6 Aluminum.
- Made in USA
- Black Anodized.
- Used with various clamps.
Auction Includes:
- One 2.375 inch clamp
- One 1/4-20 -3/4 screw.
- Hex key for ¼-20 screw
- One 8.0 inch rail.
- Two pins.
- Two M3 screws attached to the plate.
- Hex key for M3 and 1/4-20 screws.