Frequently Asked Questions
Why are your brake hoses more expensive than others sold on eBay?
There are brake hoses being sold on eBay that are being made and sold
from Argentina that are not D.O.T. Certified. All you need to do is read the
listing and you will see that NO reference is made that the brake hoses are
D.O.T Certified. Brake hoses used in the USA must be D.O.T Certified to be
Street Legal. But in other Countries that is not required and that is why they
are allowed to sell on eBay. All you need to do is email them and ask for a YES
or NO answer to a simple question
"Are your Brake Hoses D.O.T. Certified and Legal for use in the USA?"
There are also US Sellers that are buying the cheap brake hoses and reselling
them, so watch out for those.
Are your Brake hoses D.O.T. Certified?
Absolutely! we have been approved and given a registration number by the
D.O.T. All brake hoses manufactured with the equipment we use and the
components meet or exceed D.O.T FMVSS106 and SAE J1401 standards. Our brake
hoses meet all International Safety Standards and have all the proper labeling
on the hoses to pass Vehicle Inspections in any State or Country.
Why should I care if the brake hoses are D.O.T approved?
When a brake hose has D.O.T. certification it means that the Equipment,
Parts and Process all met the requirements to make a safe brake hose.
Unfortunately there are people selling counterfeit brake hoses to the public
that have not been D.O.T. approved which makes them illegal to use in the USA.
Are you risking your Life, Vehicle and Family with cheap brake hoses???
How are the brake hoses identified as being D.O.T Certified?
All the brake hoses we make must have our D.O.T. number crimped into the
fitting when made. The brake hoses are also D.O.T. labeled and date coded per
regulations.
So at any time, no matter where our brake hoses go, they can be traced
back to us.
Do you offer
any kind of a warranty on your brake hoses?
We have a two year warranty that covers the fittings and crimp for
leakage on our Rubber and Braided Stainless Brake Hoses from the date of
purchase. The warranty does not cover brake hoses because of improper
installation that results in the brake hose rubbing or stretch failure.
If I have a problem with a brake hose what do I need to do?
All you need to do is contact us by email or phone and we will give you the
information where to send the defective brake hose. Once it arrives we first
make sure it is our hose by the D.O.T. number in the crimp area. It will
then be examined and we will contact you on what conclusion we came to and what
we can do resolve the problem.
Why do you have to have the PVC Cover on the hoses?
The D.O.T. determined that the Braided Stainless Brake Hoses used for
Street use needed to have a coating to protect the inner Teflon tube. It was
found that dirt particles were working through the uncovered stainless braid and
getting down to the Teflon inner tube. Then as the hoses moved it acted like
sand paper and wore away the inner tube causing failure. Uncovered hoses are
still being sold but they are suppose to be labeled for "OFF
ROAD USE ONLY" when sold.
What is a Whip Insert?
The Whip Insert is placed on the end of the Braided Stainless Brake Hose
before we place the fitting on for crimping. The Insert is made with a special
aluminum that is a buffer between the stainless hose and steel fitting. This is
required to prevent premature hose wear if there is any side movement (Whip) as
the hose is used, being a softer material it buffers some of the motion. If you
have steel on steel the hose would wear out prematurely. There is actually a
D.O.T "Whip Test" that our process and hoses had to pass before we were allowed
to make Street Legal Braided Stainless Hoses.
What about liability?
We carry a product liability policy that we must have in order to make
and sell brake hoses.
Do you test your hoses?
All hoses are pressure tested to 3000 psi, twice the maximum operating
pressure of any normal vehicle.
Do you make Custom hoses?
Yes, we can make almost any brake hose configuration
you need to make your Custom or Rod look great. No need in having a brake hose
that is to long or to short, or a bunch of hodgepodge adapters to make it fit.
Normally how long does a brake
hose last?
The average life expectancy of a brake hose is about
six years once it is put into service. This is based on a daily driven
vehicle. So the less you drive a vehicle the longer the brake hoses will last.
Do you make Stainless Steel Braided Hoses?
Yes, We can make almost any brake hose in either Rubber or Braided
Stainless Steel. But the Braided Stainless Steel do cost more to purchase.
|