Part Number # LLSP2
Product Description:

New Hejnar Photo Long Lens Support Package 2. Package include lens support bracket, 8 inch rail, 2.375 inch clamp(part F62) and mounting bushing. Bracket can be permanently mounted to 8 inch rail if you are using only one lens or can be mount inside clamp if you are using it with various lenses and need to adjust height quickly (Second clamp sold separately). If you own long lens with lens foot rail can be mounted directly to the bottom of the foot  in best position for balancing purpose.  If your lens does not have mounting foot you need to mount clamp  onto rail .


Compatible with:
  • Markins including level release clamp
  • Really Right Stuff, including level release plate.
  • Arca Swiss
  • Wimberley
  • Kirk
  • Photo Clam
  • Foba 
  • Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)
  • Custom Brackets
  • Jobu Designs
  • Acratech
  • Other Arca swiss type products 
Bracket Specification:
  • One captive style slot.
  • One captive style screw.
  • Double-dovetail design allows for dual clamping surfaces.
  • Made from 6061-T6 Aluminum.
  • Made in USA
  • Black Anodized.
  • Used with various lenses.
Rail Specification:
  • 8.00 inch long
  • 1.5 inch wide
  • 1/2  inch thick.
  • Weight 4.1 oz (115g).
  • Metric scale.
  • Hole in front for lens support or other accessories. (1/4-20 tap hole)
  • Three captive style slots.
  • Rail incorporates a double-dovetail.
  • Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
  • Precision C.N.C. machined from 6061-T6 Aluminum
  • Stainless steel hardware.
  • Black hard coat anodized clamp and clear anodized knob.
  • Made in USA.
  • Two screws. Screw will be about 0.3 above plate surface. If you are planning of using plate with blind hole please check depth of it. You may need shorter screw.
Clamp Specification:
  • 2.375 inch long
  • Weight 3.6oz (103g)
  • Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3⁄8”-16.
  • Two outside holes are taped 1/4-20 and 30mm apart from each other.
  • 2.6mm deep relief grooves   guarantee compatibility with most plates/rails.
  • Relief groove  prevents free fall when the clamp is not fully closed and your plate has safety stops
  • Knob is captive. Knob stops at maximum opening  - cannot be lost in the field
  • Knob is made from one part aluminum. No room for dust or sand.
  • Back side has grove to match some ball heads connection and preventing it from twisting.
  • Precision C.N.C. machined from 6061-T6 Aluminium
  • Compatible with Kirk, R.R.S., Arca-Swiss, Markins, and many other Arca-Swiss style Quick release plates and rails.
  • Stainless steel hardware.
  • Black hard coat anodized clamp and clear anodized knob.
  • Made in USA.
Bushing  Specification::
  • 0.30 inch long.
  • 0.5 inch flange diameter.
  • 0.05 thick flange.
  • Made from Stainless Steel

Auction Includes:

  • One lens support bracket. (LLSB)
  • One 8 inch rail. (G010-80)
  • One 2.375 jaw length clamp (F62)
  • One Stainless Steel bushing.
  • One 1/4-20 ½ inch  screw for mounting clamp to other equipment.
  • Three 1/4-20 ½ inch captive style screw.
  • Two M3 screws attached to the plate
  • Hex key for ¼-20 screw and M3 screws
Shipping Information:
  • Free Shipping with USPS First Class Mail. 
  • Tracking information provided. 
  • USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. 
  • If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.