LED Flashlight PL Lamp Bulbs 3.0V for Standard 2-C,  2-D, 2-AA Cell Flashlights

                                                 Photo            

Use these (0.5W), (10.0W) LEDs to upgrade standard 2-cell flashlights to superior brightness, efficiency, and longevity.

    NOTE:  The Smallest LEDs of (0.5W) LEDs are Equivalent in brightness or a little more than a PR2 Incandescent  bulb. 

These LED's 

(0.5Watt) = 75 lumens bright on fresh standard or alkaline batteries and (will not light below 2.4 Volts)

(10 Watt) =520 Lumens, 345-520 lumens bright on fresh standard or alkaline batteries and (will not light below 2.4 Volts)

·       The Better LED of this add is the Cree 10-Watt - LED Upgrade to 520 Lumen BULB for Flashlight 2-Cells (3.0V) for C D AA

     https://www.ebay.com/itm/2326168618876 

Stop this 10 Watt LED is NOT for your Fulton or MX-991 

“Even new the 2-Cell Fulton’s biggest weakness is it's switch”.

These DC to DC leds below work well in most all flashlights and battery types We Recommend these LEDs also have a Great Upgrade LEDs made for both Regular or Rechargeable NiCad or Ni-Mh 2-6-cell lights ! 

             Why not try one of these for your better flashlight?

For regular 3V or rechargeable batteries with 2.4V NiCad or Ni-Mh 2-cell lights !

 We recommend these Best regulated LEDs to get the most light out of your batteries to be bright on low voltage batteries with high brightness from 2 – 9V when batteries are new or half discharged!

·       5.0W CREE at 230+ lumens - LED Upgrade PR Bulb for LUMILITE Flashlights Z-2D Z-2C Z-2AA 1-9V

https://www.ebay.com/itm/233091305276

·       3W Epistar at 200+ Lumens - LED Upgrade Bulb for MAG-LITE® 1 to 6 Cell Flashlights 0.4A, 1- 9 Volt

https://www.ebay.com/itm/232341382951

      ·       0.5W – at 50 Lumens - LED Upgrade PR Bulb w-boost dc/dc (1-6) Cell Flashlight 1-9V Headlight

       https://www.ebay.com/itm/332227325881


We have both LEDs and incandescent or halogen bulbs for special applications like Headlights, Bike lights, Radios, and the brighter LEDs that can compare with halogen bulbs.  

Also, we have LEDs that are Universal Polarity work either (+ or -) on bottom contact and test LEDs that allow determination the voltage polarity in bulb sockets. 

 If you're not sure, let us try to help select the best LED for your needs!

                        --- Super Bright Led's for Less --- 

Simply replace your existing bulb with this LED – no modifications necessary!

  • Works with standard 2 cell flashlights
  • Minimizes battery and bulb replacement waste
  • Focusability of flashlight is preserved with these point source LEDs
  • Brighter Light for improved vision for enhanced visibility of fine detail
  • Longer battery life from high efficiency LED
  • Long lamp life 50,000 hours of continuous use
  • Dependable and shock resistant
  • Easy To Install
Features:

INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.

FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.

LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.

INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.

EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary

See the difference!

 
* Select the perfect bulb by wattage balancing (Brightness vs. Longer Battery life run time).

      Standard PR2 Incandescent vs. LED 0.2 Watt                             LED  1.0,   0.5, and 0.2 Watt

                                                              Photo

 

1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

 

2) Warning! - For safety always follow manufactures safety and operational instructions.  

 

3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.

 

 

Description:

Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb

2-cell battery operated products (Energizer Zink, Energizer Alkaline*,  PowerGenix NiZi* ,and Energizer AA lithium*.

*For best lighting performance the use of better batteries is recommended because they maintain higher working voltages / currents.

NiCad, NiMH batteries are lower votages and are not as bright unless they are fully charged.

  ·       Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two

 ·      Buy 10 and get 1 extra bulb free

Also you maybe interested in AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size

                                         https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=331078037178&ssPageName=STRK:MESE:IT#ht_685wt_1124

This is a very popular style of bulb for Many Viewers, flash lights, and devices that run on two batteries (not 3 cells)

The LED lamps are 0.2W, 0.5W, and 1.0W is the best. The difference is in the brightness and cost.

If you want long run time choose the .2W or .5W. Personally, I would recommend the 1.0W so when you want light you have a bright light.
Also, I have a special on buying one of each for $15.90 so you can have both ways.

From the Drop down select the size 0.2, 0.5, 1.0, or 5.0 Watt      OR  Get a set with one of each size. 

Specifications for  LED Bulbs vs. Standard Bulb   *Choose the perfect bulb for "your use"

Lamp Part Number

WP13.5S-
0.5W

WP13.5S-
10W

Incandescent PR-2 (Reference Only)

Brightness

Bright
(2X)

Bright
(20X)

White to Amber
(1X)

Lamp Battery Run Time vs. PR2

Longest
(12X)

Longest
(2X)

Short
(1X)

Base Type 

P13.5S

P13.5S

P13.5S

Voltage

3.0V

3.0V

2.4V

Voltage Range

2.7-3.2V

2.7-3.2V

2.5-3V

Current (TYP 3.0V)

70mA

410mA

500mA

Luminous Flux (3V)

75 Lumen

520 Lumen

10 Lumen

Light Color

White

White

White

Lamp Life Hours

50,000

50,000

15

Max. Overall Length

0.90"

0.90"

1.20"

Max. Lamp Dia.

0.53"

0.53"

0.53"

Primary Application

 2-Cell Flashlight, Lamp,
lantern

2-Cell Flashlight, Lamp,
lantern

2-Cell

Flashlight, Lamp, lantern

All Standard Polarity with bottom contact (+) Flange (-) 

*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product.

1 LED Flashlight Lamp, For 2 "AA" Or "C" Or "D" Size Batteries

The Lamp has a STANDARD 'PR' Base - P13.5s is International standard flanged base, 9.2mm Diameter, with flange "V" notch

   FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers.  Thank You.

If for any reason you are not satisfied with your purchase, CONTACT US FIRST to RESOLVE any issue. 

We want your repeat business!

© 2014-2024 Draco Products. All Rights Reserved