Important Safety Advisory

As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general 
reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, 
type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while 
driving. If you are not confident or familiar with the installation, please ask a trained professional for help.



As shown in the pictures, these spacers do not have a wheel-centric lip. If your wheels do not use conical/cone seat lug nuts, there is a high chance it will not center properly which could result in steering wheel vibration.



 Hubcentric Rings / HubRings

- If your vehicle hub is smaller than 108mm, these spacers will not properly center around your hub which could cause steering wheel vibrations.  We recommend purchasing hubcentric rings to reduce/prevent steering wheel vibrations. 

- You can click on one of the following links to purchase hubrings from us: Aluminum or Plastic.  If you would like help finding the correct one, please send us an eBay message.



 Before Purchasing

- Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner.

- The vehicle’s wheel studs need to be measured. If the studs are longer than 1.0" (25mm), it will extend past the spacer's surface.  It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.

- If your vehicle does not have 12x1.25 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.



 During Installation

- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.

- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.

- ALL Lug Nuts (on the spacers and the wheels) MUST be torqued to manufacture specifications.


 After Installation

- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).

- Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle. 




 No returns or exchanges once product has been installed on the vehicle.

	

	
	Can fit on many 6x139.7 or 6x5.5 bolt pattern vehicles. See list below. Make sure to also read Important Notes section


	1997-2003 - Infiniti - QX4

2004-2013 - Infiniti - QX56


2005-2014 - Nissan - Armada

1998-2004 - Nissan - Frontier

1987-2004 - Nissan - Pathfinder

1995-1997 - Nissan - Pickup

2004-2014 - Nissan - Titan

2000-2004 - Nissan - Xterra


WARNING: For proper installation, it is REQUIRED that the back of your wheels have small cavities in the mounting pad.  These cavities are needed so that the lug nuts and wheel studs can sit in this pocket.   Please verify this before purchasing.  Message us for any questions before purchasing the item.



	

	Don't see your vehicle above? Message us with the year, make, & model of your vehicle and we will help!

	
	 See eBay's "Shipping and Payments" tab for shipping cost and estimated delivery time.

	

	 Local Pick up / Will Calls - Not Available

	

	 NOTE for International Customers: Buyer is responsible for any import taxes and/or customs charges for the item. The amount may vary from country to country.
	

	WARNING: Professional installation is highly recommended. Misapplication and/or improper installation of wheel spacer/adapter combinations may cause lug nuts/bolts to break or loosen while driving, potentially causing accident and/or injury. Use on any vehicle or wheel sizes or types not recommended or specified is at the users sole risk. ENSURE THAT YOUR WHEEL STUDS AND/OR LUG NUTS SECURING SPACER TO THE VEHICLE DOES NOT MAKE CONTACT WITH THE BACK OF THE WHEEL.  Do not use impact wrenches/tools. Torque lug nuts / bolts to manufacturer specifications using a torque wrench. Users must check and retorque all lug nuts / bolts after 25-50 miles of driving. No returns or exchange once installed.

Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)

This listing is currently undergoing maintenance, we apologise for any inconvenience caused.