[ BE AWARE ] These are EXTENDED length bolts and are meant to be used WITH WHEEL SPACERS.



[ SPECIFICATIONS ]

Thread Size: 12x1.5

Color: Silver

Seat Type: Cone Seat (60 Degree Taper)

Shank Length: 39mm



[ FITMENT ]

Compatible with BMW 3-Series E30 E36 E46 E90 E91 E92 E93 (Up to 2012)

Compatible with BMW 5-Series E28 E34 E39 E60 E61 (Up to 2010)

Compatible with BMW 6-Series E24 E63 E64 (Up to 2003)

Compatible with BMW 7-Series E23 E32 E38 (Up to 2001)

Compatible with BMW 2000-2009 Z3 & Z4 (E52 E85 E89)



[ NOTE ] Buyers NEED to verify seat and shank length.


 

  • IMPORTANT: NOT OEM LENGTH. This is an extended length lug bolt, NOT an OEM replacement lug bolt. NOT to be used without wheel spacers. The correct length will depend on your OEM bolt's length and the spacer's thickness. See Diagram for Measuring Help. MEASURE BEFORE PURCHASING. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.

  • WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle's bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.

  • [SPECIFICATIONS] Pack of 20 - Silver Bolts | Thread Size: 12x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 39mm (ie thread length).

  • MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicle's hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.

  • FITMENT: Compatible with BMW 2012 & older 3-Series (E30 E36 E46 E90 E91 E92 E93); 2010 & older 5-Series (E28 E34 E39 E60 E61); 2003 and older 6-Series (E24 E63 E64); 2001 and older 7-Series (E23 E32 E38). Also compatible with BMW 1996-2009 Z3 & Z4 (E52 E85 E89).
























 
Quantity Set of Twenty (20) Lug Bolts
Thread Size 12x1.5
Seat Type Cone Seat (60 Degree Taper)
Shank Length 39mm
Grade 10.9 Grade (Factory OEM)
Hex Size 17mm
Material Steel (Heat Treated)
Finish Silver zinc plated (Prevents Rust & Corrosion)

 

FITMENT INFORMATION

How do I determine what Shank Length I need?
1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt)
2) Measure the thickness of the spacer you will be using (if not using a spacer, then this measurement is zero)
3) Add measurements from step 1 and step 2. And that is the shank length you need

What is the difference between Cone and Ball seat?
This is determined by your wheel's lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheel's lug seat. The most common seats are Cone (conical / tapered) and Ball (radius / rounded). Cone type features a straight taper seat, whereas Ball type features a curved seat.


 eBay's Compatibility Table above should only be used as a guide. The buyer is ultimately responsible for taking proper measurements and ensuring they are choosing the correct length bolt for their application

Before purchasing, check the Thread Size, Seat Type, and Shank Length to ensure it matches your vehicle's specs. View Diagram above. And see the Important Notes tab below for more details.


Important Notes



	
	Before Purchasing

	 Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.

	 Verify Shank Length - It is crucial for buyers to measure their OEM lug bolt shank length. It is not possible for us to guarantee fitment of this for your vehicle since we do not know if you are using a wheel spacer, and what size that spacer is.

	 Verify Seat Type - Wheel Lug Holes have either cone seat or ball seat. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this bolt matches their wheels.

	 Questions? Need Help? We are here to answer your questions. Message us if you are not 100% sure about fitment, shank length, or seat type.


	

	Installation

	 Professional Installation Recommended

	 Be sure to torque the lug bolts to the vehicle manufacturer specifications

	 Avoid using an impact wrench; improper usage may cause damage to components

	 Check and re-torque after 25-50 miles of driving

Legal Information



NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.
More Items!
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.