MELBOURNE HYDRO

6" cool tube Magnetic Ballast combo with HPS lamp for Grow Light system!

Comes in 250, 400, 600, 1000W!


Note: 1000W ballast and bulb are much larger than 250/400/600W; the picture above is only for demonstration

The Growlush brand 250,400,600,1000W Magnetic Ballast

for HPS & MH grow lamps
1000w Ballast Box is larger than the picture shown.
They are 350*180*150mm

Features:

● Suitable for all HPS and MH bulbs of America and Europe standard

● Input frequency: 50Hz

● Input voltage: 240Vac

● Output frequency: 50HZ

● Output Power: 250,400,600,1000W

● Power factor: >0.90

● Usage temperature: -40 to 55°C

● Maximum lighting distance: 8m

● Size: 290*115*130mm (250,400,600w Ballast), 350*180*150mm (1000W Ballast)

● Weight: 5,6,7,11kgs

● Color: Power coated in Pearl White

● Protection function: short-circuit protection, open-circuit protection, overheat protection, lamp failure protection.

● Good regulation against supply voltage variation

● Low losses Ballast with high output

● Ballast noise - silencer run, no noise at all 

● Aluminum cover designed to limit all electrical and electronic interference 

● CE, FCC, UL, CUL, ROHS and Australian C-tick approval N3499 are available

    
The Growlush Brand high output HPS super lamp: 

· Power: 250,400,600,1000 watts (High efficiency) 2100k 

· Expected Life Span: 29,000 hours

· Lumen: 29000; 69000; 91000; 150000 lumens

· Contains more red spectrum, which is best for flowering.

· Strong power to penetrate fog

· High output, high luminescence efficiency.

· Fit for all standard HPS grow light systems

· Great results for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.

Cool Tube Reflectors 6"

Cool Tube Reflectors are suitable for HPS and MH tubular lamps up to 1000 watt.  The reflectors are fitted with pre wired lamp holder and cord, aluminum reflector inner & Outer Reflector and outer, heat resistance glass and ducting setup.

It is a plug and play version and ready to LIGHT & GROW ~~!!!

Specifications:

Cool Tube Reflector version "IO": Aluminum I = inner & O = outer of the cool tube

  • The Air Cooled full sealed reflector features a heat resistance glass tube, a European aluminum insert inside and outside above the tube that offers 95% reflectivity.
  • Power is provided via a pre wired 600-volt E39/40 lamp socket outfitted with the industry-standard common lamp cord.
  • The light fitting has flanges on both ends.
  • Covering large area, Plenty lights and reflection, NO HEAT, good for all growing process.
  • 5" Cooltube Reflector: 500mm (Length) x 125mm(Diameter)
  • 6" Cooltube Reflector: 600mm (Length) x 150mm(Diameter)
  • 8" Cooltube Reflector: 650mm (Length) x 200mm(Diameter)
  • Weight 2kg approx.
  • Suitable for all HPS and MH tubular lamps up to 1000w
  • International Electrical Safty certificates: UL, CE, RoHS and Australian C-tick N3499

Pegasus Black Magnetic Ballast 600w only

  • Power 600 watts
  • Start Up Current 3.85Amp || Run Current 3.73Amp
  • Powder Coated Metal Enclosure with Louvers
  • Low Loss Ballasts
  • Thermal protection fitted to Ballast
  • Long Distance Ignitor
  • Metal Can Capacitors used to avoid possible explosion at the end of capacitors life
  • External Fuse Protection
  • Fully approved equipment
  • Australian C-Tick approval N3499
  • Available in 240 volt and 110 Volt Configurations
  • Specified Frequency: 50/60Hz
  • With power cord to wall (AUS standard plug)

Package:

250W

400W

600W

1000W
  • 1 x HPS Magnetic Ballast 250 Watt
  • 1 x HPS Lamp 250 Watt
  • 1 x Cooltube 5"
  • 1 x HPS Magnetic Ballast 400 Watt
  • 1 x HPS Lamp 400 Watt
  • 1 x Cooltube 6"
  • 1 x HPS Magnetic Ballast 600 Watt
  • 1 x HPS Lamp 600 Watt
  • 1 x Cooltube 6"
  • 1 x HPS Magnetic Ballast 1000 Watt
  • 1 x HPS Lamp 1000 Watt
  • 1 x Cooltube 8"

or Pegasus Ballast Bundle

1 x HPS Magnetic 600w Pegasus Ballast
1 x HPS Lamp 600w
1 x Cool Tube 6"








DataCaciques