Wynn's Turbo Cleaner
Wynn’s Turbo Cleaner cleans and unblocks dirty turbochargers.
When spraying, it produces a foam, which has a long lasting cleaning effect on the surface of the turbo.
Cleans and unblocks dirty turbocharger geometry with or without dismantling. Dissolves gum, lacquer, tar, carbon and varnish.Restores turbo power to its original activity.Regains optimal air/fuel ratio.Harmless to exhaust gas after-treatment systems.
Cleaning the turbo (inlet side) without disassembly
1. Start the engine and let it warm up. Remove the flexible hose in the intake system, located between the air filter box and turbocharger / intercooler
2. For petrol engines run the engine up to 2000 rpm. For diesel engines let the engine idle, NEVER throttle.
3. With a warm engine, spray the product into the inlet side of the turbo.
4. Spray Wynn’s Turbo Cleaner in short intervals to avoid a spontaneous increase of rpm and engine knock.
5. After each spraying wait for the rpm to set back to the original level.
6. If necessary, throttle for petrol engines to avoid stalling. For diesel engines NEVER throttle.
Please Note we do not ship to the following postcodes. If you do accidentally order we will cancel the transaction :
AB 31 to AB 38
AB 40 to AB 56
Channel Islands
HS
Isle of Man (IM)
IV 1 to 28
IV 30 to 32
IV 36 & 40
IV 41 to 49
IV 51, 55 & 56
IV 52 to 54
IV63
KA 27 & 28
KW 1 to 14
KW 15 to17
Northern Ireland (BT)
PA 20
PA 21 to PA 38
PA 41 to 49
PA 60 to 78
PH 4 to PH 16
PH 42 to 44
PH 49, PH 50
PH16 to PH41
ZE