|
General characteristics General
Double triodes, used as an wide band HF power amplifier.
Envelope: glass.
Mass 20 g.
Type | 6N6P | 6N6PI |
Filament voltage, Volt | 6.3 | 6.3 |
Anode voltage, Volt | 120 | 120 |
Grid voltage, Volt | -2 | -- |
Resistance in cathode circuit, Ohm | -- | 68 |
Type | 6N6P | 6N6PI |
Filament (heater) current, mA | 750±60 | 900±50 |
Anode current, mA | 30±10 | 30±8 |
Reverse grid current, mkA | £0,5 | £1 |
Dissipate cathode-heater current, mkA | £50 | -- |
Mutual conductance, mA/V | 11±2.9 | 11±2.9 |
Gain coefficient | 20±4 | 20±4 |
Vibration noise (by RA=0.5 kOhm), mV | £100 | £100 |
Inter electrode capacitance, pF: input | 4.4 | 4.4±0,7 |
output 1st triode | 1.7 | 1.65±0.25 |
output 2nd triode | 1.85 | 1.8±0.3 |
transfer | £3.5 | £3.5 |
Operation time, h | ³3000 | ³500 |
Limited operating values
Type | 6N6P | 6N6PI | ||
Filament voltage, V | 5,7-7 | 5,7-7 | ||
Anode voltage, V | 300 | 300 | ||
Grid voltage, V | -- | -100 | ||
Cathode - heater voltage, V | 100 | 150 | ||
Cathode current, mA | 45 | -- | ||
Anode dissipation (on each triode), W | 4 | 4 | ||
Each triode grid dissipation, W | -- | 0.3 | ||
Resistance in grid circuit, MOhm | 1 | 1 |
Operating environmental conditions
Type | 6N6P | 6N6PI | ||
Acceleration of vibration loads, g | 2,5 | 6 | ||
by frequencies, Hz | -- | 10-600 | ||
Acceleration of multiple impacts, g | 12 | 120 | ||
Acceleration of single impact, g | -- | 500 | ||
Continuos acceleration, g | - | 100 | ||
Ambient temperature, °С | -60 to +70 | -60 to +85 | ||
Relative humidity at up to 40°C, % | 98 | 98 |