STOCK# - PMMA0385 MFG# - PH155 New and unused. In the original manufacturer packaging. This ships FREE within the U.S. when using ground service. If ordering it you may add more items to your order without incurring any shipping charges if shipped within the U.S. using ground service. This is the Radio Controlled Electric Gasoline or Glow Powered Almost Ready to Fly Phoenix Model 1/7 scale Turbo Beaver Airplane. For Intermediate Level Flyers.
**Additional Technical Info Will Be Added When It Becomes Available.**
Construction: Laser cut balsa and light plywood hard points for mounting float kit built into fuselage (float kit not included must be purchased separately) Wing: 2 piece w/all wood construction ailerons pre-installed aluminum wing joiner Aileron Control: Dual servo Cockpit: Operational doors clear plastic windows and pilot figure Covering: High quality heat shrink covering Radio Compartment: Plywood reinforced Landing Gear: Scale main gear spring wire for tail gear Wheels: Three 2.5 (63.5mm) diameter foam Fuel Tank w/pre-assembled stopper approximately 14oz (420cc) Engine Mount: Two-piece composite plastic Motor Mount: Plywood with aluminum standoffs Spinner: Plastic red in color 2.7 (70mm) diameter Warranty Period: 90 day limited warranty
ARF Phoenix Model Turbo Beaver with Landing Gear Wheels Fuel Tank Instrument Panel Pilot Spinner Instruction Manual
For Glow Operation; Engine: .91 2/stroke
For Gasoline Operation; Engine: 15cc
For Electric Operation; Brushless Motor: Rimfire 80 ESC: 60-100A LiPo Battery: 6S up to 4000 - 5500mAh
Radio: 6-channel minimum Servos: Seven standard (2-aileron; 2-flaps: 2-elevator; 1-rudder) 1-throttle if using gasoline or glow engine Servo Extension: Two 12 (305mm) for aileron serrvos Y-Harness: One for aileron servos Receiver Battery: 4.8-6V 800-1200mAh NiMH Misc. Items: 1/4 foam rubber padding medium fuel tubing propeller building and field equipment.
Wingspan: 74.8 (1900mm) Weight: 10.1 - 11lb (4600 - 5000g) Length: 56.2 (1428mm) Wing Area: 671 sq in (43.3 sq dm) Wing Loading: 34.41 oz-sq/in (105 g-sq/dm) Servo Mount: 0.83 x 1.6 (21 x 42mm) Center of Gravity: 2.6 (65mm) Back from the wing s leading edge measured at the fuselage Control Throws- Low Rate High Rate Elevator: 0.43 (11mm) 12% expo 0.51 (13mm) 12% expo Rudder: 0.98 (25mm) 15% expo 1.6 (40mm) 15% expo Ailerons: 0.43 (11mm) 10% expo 0.51 (13mm) 10% expo Flap: 0.59-0.79 (15-20mm) down
jxs 04/18/16 ir/jxs
Payments – PAYPAL IS THE ONLY PAYMENT WE ACCEPT.
International Buyers Only – Please allow 2 to 4 weeks for international deliveries. Not all international packages are shipped with tracking information. Please Note: Duties and taxes are not included in the item price or shipping charges. Please check with your local customs office prior to buying. These will be added by your local authorities upon delivery - do not confuse them for additional shipping charges. We are unable to falsify the value of the shipment because that would be illegal. Feedback Ratings – Please contact us first if you feel that you cannot give us ratings of 5 in all categories. We make overall customer satisfaction our #1 priority and would appreciate the opportunity to earn a 5 rating.
|