Compatible with Yaesu transceivers Models FT-920, FT-1000, FT-1000D, FT-1000MP, FT-1000MPMKV, FT-1000MPMKV-Field, FT-2000, FTDX-5000/D/MP, FTDX-9000/D/MP (transceivers not included) and all other models with 5 pin DIN Data/Packet port (with same pin assignment). This interface allows your PC or Laptop, to decode/encode digital signals using free (or paid) software.

3 in 1 - BEST VALUE FOR MONEY
USB audio interface + Digital Interface + PTT control
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard 
• No need to use internal or USB serial port.
  
• No need to plug and unplug your mic & speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MultiPSK and any other program that can send PTT tone to right audio channel or play the digital signal to both audio channels.
• No problems reported, but if you want galvanic isolation, you can order together a transformer set using this LINK. In such a case, shipping cost (for the transformers set), will be refunded.
• You can download software clicking HERE
  
  

• Connect USB Interface to a free USB port (OS will detect it and install drivers). If not, try other USB port or connect it alone if you use USB hab.
• Open your application and configure it to use the proper audio device and select audio mono output or PTT tone to right audio channel. If you can't find such options, probably application sends signal to both audio channels (no problem).
• Tune your radio to a digi mode frequency.
• Open USB Audio properties, adjust audio output and MIC level tho the highest level. If it is necessary, disable Mic AGC.
  
• Plug 5 pin DIN connector to Data/Packet port.
• Tune your radio to a digimode frequency.
• Use right potentiometer to adjust audio until you have the proper receiving (RX) level.
• Use left potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.
• For more info and instructions about interface, use the link included in the box.

Interface is hand assembled and fully tested prior shipment.
Total interface length with cable is ~1m. Cable, box, jack or knob color could vary.
USB cable not included (type "A male to B male").
Dimensions: 5.9x9.2x2.5cm (2.3x3.6x0.98in)

Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.

Before you order, please read carefully the item's description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses.
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post. Shipping with a courier, will be extremely expensive
• Normally delivered within 5-15 business days after shipping. If you want it very fast, I can not guarantee it, but it will not be unusual, if you receive it in less than 5 days.
  
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast. Also, some countries does not update tracking history, until they deliver the packet.
• 
  
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.