Land Rover Truck Cab External Basic Roll Cage Kit

The kit includes all the bent up parts and straight parts to make the roll cage in the pictures. (Chassis mountings are not included). Some of the ends of the tubes are notched but not all. This is a basic kit. Other kits are available - please see our eBay Shop. This kit does require a good level of fabrication and welding skills. 

This is a Kit Form Truck Cab external roll cage for Defender 90/110 ready to fit, made by Tube Bender Ltd. This kit comes complete with Front hoop (Mounted through the wings), lower windscreen rail and main hoop (bent to mount on the load bed).

The main hoop follows the contours of the outside of the truck cab. It has the same angle as the side of the cab and is designed to sit just above level with the top of the cab.

The kit is supplied with a straight piece of tube suitable for the diagonal in the rear hoop. 4 bars joining the front hoop to the rear hoop over the roof and 2 rear stays from the top of the rear hoop to the rear of the load bed. All tubes come pre-bent. The rear stays and diagonal all come notched one end. The front hoop windscreen bar comes notched both ends.

Please contact us if you would like this cage fitted. Typically you can drop it off on a Friday and collect it late Sunday/Monday. Fully installed ready to go

The Kit Includes

1. Rear hoop. Ends Left Long

2. Front hoop. Ends Left Long

3. Rear Diagonal. One End Notched – Other Left Long

4. 2 x Rear Stays. One End Notched – Other Left Long

5. Windscreen Rail. Both Ends Notched.

6. 4 x Over Roof Bars. Ends Left Long

Please note – We can make this cage in either of the following sizes,

42.4mm OD x 3mm Wall Mild Steel Tube

or

48.3mm OD x 3mm Wall Mild Steel Tube

Each size is bent on the following radius,

42.4mm OD – 90mm CLR

48.3mm OD – 139.7mm CLR 

MATERIAL – Mild Steel (BSEN10219:2006 Grade S235JRH)

Check out the gallery on our website to see previous work done!

www.tube-bender.co.uk/gallery.html 

Please note this cage is not CDS steel. It is a show cage. If you would like a CDS Steel cage then please see the listing in our eBay shop.

We have in stock all types of roll cage tube from standard CDS up to T45 and Chrome Moly and can supply this by the metre if required. Please see the items in our eBay shop.

All bends are produced on a market-leading and numerically controlled Baileigh Industrial rotary draw bender, which is accurate to +/- 0.1 of a degree. The dies used to manipulate the tube are fully machined, from a single billet of A36 low carbon steel or 1018 mild/low carbon steel depending on the CLR. The counter die uses a 954-C aluminium bronze head with a UHMW plastic slide. Using fully-machined dies as opposed to a cast die means that the quality of the bend is better, due to cast dies leaving an imprint on the inside of the tube rather than an as-drawn surface finish. Baileigh Industrial is the only company on the market to supply fully machined tooling, which is why we’re proud to use their products.

If you have ANY QUESTIONS then PLEASE message us via eBay or alternatively email us at before buying. We will be more than happy to answer them!

Please feel free to send any bespoke drawings through to us – we are very experienced in creating custom projects/applications. We can then put up a new item on eBay with an agreed price for that particular job so that you can continue buying in a safe environment.

PRICE GUARANTEE

Tube Bender Limited will not be beaten on price, whether it’s for one, 10, 100 or 1,000 parts! If you can email us over a quote you have received or a link to a price you have seen – we can guarantee to beat it by at least 10%!