HDP 1 is a mono D-Class car audio amplifiers providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power. HDP 1 features a subsonic and a Lo-Pass filer, both at 24 dB/Oct. Maximum installation versatility: just like the whole HDP line, the mono is equipped with the HDP IN system which, through the Speaker In and RCA inputs, provides the ability to interface with any OEM and aftermarket source. - See more at: http://www.hertzaudiovideo.com/car-audio-amplifiers-hdp1/#sthash.s8vTy7wR.dpuf
HDP 1 is a mono D-Class car audio amplifiers providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power. HDP 1 features a subsonic and a Lo-Pass filer, both at 24 dB/Oct. Maximum installation versatility: just like the whole HDP line, the mono is equipped with the HDP IN system which, through the Speaker In and RCA inputs, provides the ability to interface with any OEM and aftermarket source. - See more at: http://www.hertzaudiovideo.com/car-audio-amplifiers-hdp1/#sthash.s8vTy7wR.dpuf
HDP 1 is a mono D-Class car audio amplifiers providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power. HDP 1 features a subsonic and a Lo-Pass filer, both at 24 dB/Oct. Maximum installation versatility: just like the whole HDP line, the mono is equipped with the HDP IN system which, through the Speaker In and RCA inputs, provides the ability to interface with any OEM and aftermarket source. - See more at: http://www.hertzaudiovideo.com/car-audio-amplifiers-hdp1/#sthash.s8vTy7wR.dpuf

HDP 1 is a mono D-Class amplifier providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power.
HDP 1 features a subsonic and a Lo-Pass filer, both at 24 dB/Oct.
Maximum installation versatility: just like the whole HDP line, the mono is equipped with the HDP IN system which, through the Speaker In and RCA inputs, provides the ability to interface with any OEM and aftermarket source. Using Speaker In inputs, the ART™ ( Automatic Remote Turn On-Off) function is available; the user can also switch it off. It features dotato a status monitor communicating with the user through a LEDs system.
The double-extrusion heat sink and the Hertz logo, which is back lit and can be rotated, allow especially sophisticated installations.

Specification

  • OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:
  • 1 Ch 600 W x 1 (4Ω)
  • 1 Ch 1000 W x 1 (2Ω)
  • Power supply voltage: 11÷15 VDC
  • Idling current: 2 A
  • Idling current when off: 0.04 mA
  • Consumption @ 2Ω, 14.4 VDC
  • (Max Musical Power): 60 A
  • Amplifier stage
  • Distorsion - THD (100 Hz @ 4Ω): 0.08 %
  • Bandwidth (-3 dB): 18 ÷ 150 Hz
  • S/N Ratio (A weighted @ 1 V): 103 dB
  • Damping factor (100 Hz @ 4Ω): 100
  • Pre-In sensitivity: 0.3 ÷ 5 V RMS
  • Pre-In impedance: 15 kΩ
  • Speaker-In sensitivity: 1.4 ÷ 24 V RMS
  • Speaker-In impedance: 470 Ω
  • Load impedance:
  • 1 Ch 4 ÷ 2Ω
  • Thermally optimized double extruded heatsink, ergonomic and aluminium die-cast end caps;
  • 4 LEDs monitor the status of the amplifier and communicate with the user;
  • Special balanced input circuitry to reject electromagnetic disturbances present on the Pre-amplified or Speaker level inputs;
  • HDP Input featuring either Speaker In (OEM radio) and RCA In (Aftermarket radio) inputs;
  • ART™, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker In only);
  • Full range Pre-out, also available when using Speaker Level In inputs;
  • Continuously variable (0–180°) phase control for proper alignment of the subwoofer output with the front woofers;
  • Continuously adjustable (18 to 40Hz) 24dB/Oct. subsonic filter;
  • 24 dB/Oct. continuously adjustable (40 to 150Hz) Lo-Pass filter;
  • Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable (1000 W RMS) output stage based on solid TO220 Power Mosfets.

Mini FAQ-

1) Car Audio Security Ltd is a UK based company. ALL items are shipped form the UK.
2) All NEW Products come complete with at least 12 months warranty - Ex-Demo warranties differ.
3) All goods shipped are sent via an insured service to give you (and us) peace of mind - no extra hidden charges!
4) All products sold are GENUINE UK products bought direct from manufacturers
5) We have a dedicated returns & customer service department to help you with any problems you may have with your products - 08707 55 11 22
6) Collection welcome for winning bidders from our Industry leading - state of the art showroom and demo-room for car audio & home AV products
7) All shipping charges are shown for mainland UK ONLY - Offshore destinations differ (i.e. RIO, IOM, IOW, NI etc etc)